Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: Jewelry Armoire Finish Help
-
9th February 2013, 12:43 PM #16Member
- Join Date
- Jan 2013
- Location
- United States
- Posts
- 50
Re: Jewelry Armoire Finish Help
Now im wondering how well a thin veneer will stand up too that process.
The sample pieces i have are 1mm. I would have to be pretty careful during dry sanding wouldnt I?
-
9th February 2013 12:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th February 2013, 12:51 PM #17
Do a 240 and a 400 dry and see how that goes. Let the sander do the work. For the wet sand, you can cut out the 800 and just do the 400,1200,1500 and 2 and 4000g. You will still get a very good result. At the end of the process, wipe down the work piece with a clean cotton rag. Give it another wipe down about an hour later. The 2 and 4k won't really take much away at all. And the 1200 and1500 should be safe as well. If you are at all concerned, cut down the number of sanding reps to 5 back and forth.
Good Luck
Rob
Similar Threads
-
Jewelry Box
By chrisb691 in forum MARQUETRY and INTARSIAReplies: 3Last Post: 18th December 2011, 11:56 PM -
CA Finish on wood jewelry??
By CV3 in forum FINISHINGReplies: 0Last Post: 18th January 2011, 01:45 PM -
The armoire is finished!
By derekcohen in forum WOODWORK PICSReplies: 15Last Post: 12th February 2010, 09:22 PM -
few updates: table, toolchest and armoire
By stef1611 in forum WOODWORK PICSReplies: 16Last Post: 4th October 2008, 11:42 PM -
Jewelry Box
By LGS in forum BOX MAKINGReplies: 5Last Post: 22nd October 2007, 08:44 PM