Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Sep 2012
    Location
    Coffs Harbour
    Posts
    1,791

    Default Gramercy brush clean up

    Sorry if this has already been asked in this thread ,i searched but couldn't find any relevant posts

    I have got some brushes ordered from Henry Eckert fine tools, i purchased 2 of each, a set of water based finishing brush and then 2 of ox hair.

    Usually when i am finishing or painting in general i buy new cheap brushes from the big green shed and try to keep them clean with turps, once they get all hard or if they didnt get cleaned properly i usually just throw them out without another thought. As i have paid a fair bit more for these brushes i want to increase the longevity of such a product and keep them in great condition for every future finish job

    So just after ideas of how other woodworkers clean then store the brushes so they still have as good a result as the first time of using them? is it just cleaning with turps or some other product?

    Thanks in advance for any advice

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,138

  4. #3
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    Wash the water ones out with copious amounts of water then do the same again in clean fresh soapy water and rinse well.

    Remember that once a water based finish dries in the brush, it is no longer water soluble, so make sure you clean the brush promptly after use. If you can't get to the cleaning right away wrap the brush well in cling wrap to exclude any air. This will stop the finish from polymerising in the brush. Wash out as soon as you get a chance or you may have to throw the brush out.

    The ox hair brushes are best kept for shellac. These can be washed out in Metho then hung in a jar so the bristles are just in the metho. This will keep the brush conditioned and ready for immediate use at any time.

    I keep my camel hair mops in a tall bolognese sauce jar with a hole bored in the lid to take the handle a hole through the handle has a nail or similar passed through it to stop the brush from dropping into the metho and sitting on the bottom of the jar where the bristles would be permanently bent.

    My gramercy brushes sit in a plastic top jug with the holes/slits cut into the lid so as to allow the brushes to be held tight.

    There is more info about cleaning and care of these brushes on the Gramercy web site.

    Cheers - Neil

    PS I spoke to the Henry Eckert's bloke at Melb T&WWWShow last year to see if they had enough brushes for me to send people to them during the show and he told me they were out and weren't going to get any more in.

  5. #4
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default Pic. Camel Hair mop in jar

    Quick pic of camel hair mop in jar.

    You will notice the bristles aren't even in the metho but the brush is still ready for use as the fumes are enough to keep it conditioned.

    I would normally have about 5-10mm of the bristles sitting in the meths. Don't put the entire head of the bristles in there.

    brush.png

    Would have shown the Gramercy brushes hanging in Jug but it's burried in amongst all the show stuff in a really big box on top of the pallet racking.

    Hope this is of some help.

    Cheers - Neil

  6. #5
    Join Date
    Sep 2012
    Location
    Coffs Harbour
    Posts
    1,791

    Default

    Thanks for both the link and info on how you store them. The pic just ties it all together. I got some air tight jars to keep my shellac etc in and now just looking at using my other jars for the brushes. Will read through that link also.

    Thanks for your info. very informative

  7. #6
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    I once picked up a goat hair brush from China that after the conversion cost me about 50cents Australian. I wanted to see how the method mention above when using Shellac worked so I used this as a test. Works a treat and even thou it was a very cheap brush it was my go to brush for Shellac finish. I think I used it over a dozen of times in various projects. The thing that stuffed it was I allowed a friend(male?) to give a coat of Shellac on a job that I was finishing and some of the finish hit his hand and he dropped the whole brush in the shellac. The brush did not survive after that dunking.

    So what is the moral of the story, I agree with what was said on how to look after the brush and do not allow people with dainty hands to apply finish.

  8. #7
    Join Date
    Sep 2012
    Location
    Coffs Harbour
    Posts
    1,791

    Default

    Quote Originally Posted by Christos View Post
    I once picked up a goat hair brush from China that after the conversion cost me about 50cents Australian. I wanted to see how the method mention above when using Shellac worked so I used this as a test. Works a treat and even thou it was a very cheap brush it was my go to brush for Shellac finish. I think I used it over a dozen of times in various projects. The thing that stuffed it was I allowed a friend(male?) to give a coat of Shellac on a job that I was finishing and some of the finish hit his hand and he dropped the whole brush in the shellac. The brush did not survive after that dunking.

    So what is the moral of the story, I agree with what was said on how to look after the brush and do not allow people with dainty hands to apply finish.
    Good to know Christos, These brushes will be marked hands off even for my wife lol Not that she paints at all but there was one time that i had 2 nicer brushes (no way near these brushes quality) and i had them still in the packet on my workbench.

    Then when i asked if she went to the big green shed to get some new ones to paint that box she replied "oh no i used those brushes on your bench, they were really nice" and then promptly placed them in the bin thinking they were throw aways

    So ill be keeping these ones hidden in my tool chest and when in the jars the jars will have a clear label on them i will do this after i verbally warn her these are special and hand her cheaper ones to use

  9. #8
    Join Date
    Apr 2011
    Location
    Dandenong, Vic
    Posts
    2,029

    Default

    I have one of those ultrasonic jewelry cleaners, was cheap enough at Aldi.
    If its water based I clean the best I can and then put into sonic for 4 minutes, amazed at how much still comes out of the brush.
    If its solvent based I fill sonic with water and then put a glass jar with solvent in the water, put brush in there and off I go again.

    wash both in soapy water after the sonic bath.

Similar Threads

  1. Gramercy dovetail saw - a brief review
    By derekcohen in forum HAND TOOLS - UNPOWERED
    Replies: 4
    Last Post: 29th May 2013, 10:48 AM
  2. Gramercy Bow Saw
    By Polie in forum HAND TOOLS - UNPOWERED
    Replies: 12
    Last Post: 16th November 2010, 02:18 PM
  3. Gramercy Saw vice
    By Basilg in forum HAND TOOLS - UNPOWERED
    Replies: 24
    Last Post: 15th June 2010, 05:02 PM
  4. Brush Clean Up - What do you use ?
    By meerkat in forum FINISHING
    Replies: 18
    Last Post: 20th September 2006, 12:13 AM
  5. use what to clean brush
    By chinchye in forum FINISHING
    Replies: 1
    Last Post: 1st August 2005, 02:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •