Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Rubbing oil.
-
5th March 2006, 05:13 PM #1
Member
- Join Date
- Jun 2005
- Location
- strathpine
- Age
- 73
- Posts
- 94
Rubbing oil.
I need some advice on finishing with oil. I am using Rustin's and am finishing each coat by rubbing the oil with 400 grit paper then wiping the slurry off. Can I use a random orbital sander (TRITON OF COURSE) instead of hand pwer????????
-
5th March 2006 05:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
5th March 2006, 08:17 PM #2
Senior Member
- Join Date
- Apr 2005
- Location
- Chuwar QLD
- Posts
- 241
That’s exactly what is recommended on the Organoil Interior Clear Finish Oil can for a high patina (satin) finish, they say apply enough coats to obtain full (rubbed) saturation. Then obital sand with wet oiled surface used using wet and dry paper
Fantastic cheese Grommit!!
Reply With Quote
Similar Threads
-
camellia oil
By white100 in forum WOODTURNING - GENERALReplies: 25Last Post: 24th January 2013, 02:30 PM -
Oil Change
By bennylaird in forum WOODIES JOKESReplies: 14Last Post: 1st February 2006, 09:11 AM -
Peak Oil
By Grunt in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 18Last Post: 9th December 2005, 02:15 PM -
Tung Oil or........????
By vsquizz in forum FINISHINGReplies: 45Last Post: 17th September 2004, 01:18 PM -
Oil change
By Iain in forum WOODIES JOKESReplies: 1Last Post: 1st November 2001, 06:56 PM
