Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Mar 2004
    Location
    colac vic
    Age
    76
    Posts
    39

    Question Melamine/ whiteboard

    I wish to make a cabinet out of Melamine, but I wish to have a different finish to the plain white, if I gave the melamine a sanding would it hold a painted finish, eg. sealer undercoat and Enamel paint finish.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    2,685

    Default

    White Knight make a laminate paint that works pretty well. Use their laminate cleaner prior to painting.

  4. #3
    Join Date
    Jan 2009
    Location
    near Cooyar, (Toowoomba-ish), Qld
    Age
    59
    Posts
    221

    Default melamine

    Hi, I've found melamine can stain fairly easily, so I'd guess it could accept a painted finish, but I'd degloss it by scuffing first, possibly just with a decent fine scotchbrite scourer pad, and then I'd wipe some ESP by Flood company (Easy Surface Prep) over it.(Follow the instructions on the can).

    After that, straight enamel should be fine without an undercoat.

  5. #4
    Join Date
    May 2009
    Location
    New South Wales
    Posts
    1

    Default

    Hi i manufacture mdf kitchen doors and panels using mdf white board and finish in polyurethane the first thing to think about is board finish whether satin/velvet or stipple . firstly You need to take the gloss of the board to give the primer something to grab onto ,I use 120 grit but prime board with a high fill polyester primer (polyester will stick and hold on ) only problem is short pot life approx 1 hr ,Then we sand with 320 and 400 for high gloss finishes


    Mark

    http://www.duricindustries.com.au

    Edited Post

  6. #5
    Join Date
    Aug 2009
    Location
    Clayton
    Posts
    30

    Default

    Hmmm well, either one of those 2 suggestions is worth contemplating. What kind of cabinet is this? If you expect it to take wear and tear, then I'd lean towards the ESP but with oil undercoat, as this is actually still recommended. The tile and laminate paint for my money is a more expensive way of actually achieving much the same result and limiting your possible colour in the finish more too.
    Regards.

  7. #6
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    If you are making something large enough to justify a whole sheet, just buy one of the coloured melamine sheets - they are about three times the cost of white, but you dont have to buy paint, undercoat and so on.

  8. #7
    Join Date
    Jul 2008
    Location
    Mandurah WA
    Age
    62
    Posts
    1,566

    Default

    Hey there,

    Why go through all the hassles of prepping and painting Melamine when a sheet of MDF wouldn't need as much prepping and will only need an undercoat and then a gloss finish.

    HazzaB
    It's Hard to Kick Goals, When the Ba^$%##ds Keep moving the Goal Posts.


    Check out my Website www.harrybutlerdesigns.com.au

Similar Threads

  1. Magnetic Whiteboard
    By L R P in forum TOY MAKING
    Replies: 3
    Last Post: 5th September 2008, 01:15 AM
  2. Melamine
    By Munga in forum ROUTING FORUM
    Replies: 4
    Last Post: 13th July 2006, 09:20 AM
  3. Magnetic/whiteboard
    By hires54 in forum WOODWORK - GENERAL
    Replies: 12
    Last Post: 2nd August 2005, 10:21 AM
  4. Melamine joints
    By Quokka in forum WOODWORK - GENERAL
    Replies: 6
    Last Post: 16th July 2005, 11:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •