Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 5 of 5 FirstFirst 12345
Results 61 to 71 of 71

Thread: old oak table

  1. #61
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    I think i's about 1920's

    Groggy, this isnt a competition,
    I have worked a lot with old kauri and have never seen the soft wood shrink away like this, but i have seen it in old really dry oregon.
    there is a reason that it matters as that if the timber is this dry, its going to suck up a hell of a lot of oil.
    there may be a better way of finishing
    my suspision is partly supported by the timber in the skirts that sure as hell aint kauri.
    but as i said im not a timber expert and would like somone else to take a look.

    Niel is a big bloke and can defend his own corner.
    And yes cabinate makers can be wrong just like you and I, especially if you talking old dry timber that they mightn't see so much of

    Astrid
    Last edited by astrid; 3rd January 2008 at 10:01 PM. Reason: spelling

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #62
    Join Date
    Oct 2006
    Location
    adelaide
    Posts
    42

    Default

    i dont think this cabinet maker was wrong he picked them from the other side of the garden ........ and works with kauri all the time....

    he said it was very old maybe pre 1900 but legs made later

    its just a hobby to me i dont really take it that serious

    David

  4. #63
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    Looks really good,
    let it dry and put on a few more coats.
    next project?
    Just cross posted,
    I picked 1920's because of the legs, after all a slab of wood is a slab of wood.
    I wouldnt add varnish wont stick well to all that oil.
    when its well fed and dry. give it a good hard rub.

    Astrid

  5. #64
    Join Date
    Jan 2005
    Location
    Melbourne
    Age
    65
    Posts
    11,997

    Default

    Astrid, I've re-read the thread and my comments and can see why you have interpreted my comments that way, I'm sorry for that, it wasn't my intention. The comment on Neil's post was simply acknowledging his apparent accuracy.

    I was interested in knowing why you BOTH seemed not to agree after a cabinet maker has seen the timber first-hand, rather than photos, which make it harder to ID timber.
    I personally find it difficult to identify wood, it is a skill I don't possess, and, if two experienced people disagree on the identification given, then I figure there must be a reason, therefore something to be learned - hence the confused smiley .


  6. #65
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    Not a problem groggy
    see you on saterday

    Astrid

  7. #66
    Join Date
    Oct 2006
    Location
    adelaide
    Posts
    42

    Default

    will post some photos . had 4 coats of oil now

    it blistered in parts today because of the heat ,, but thats ok i just sanded scrapped and reoiled ,,, beautiful

  8. #67
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    well try to keep it out of the sun, and dust
    astrid

  9. #68
    Join Date
    Feb 2006
    Location
    USA
    Posts
    402

    Default Watch the sun, it can be bad.

    You sound like your loving the finishing, keep it up it gives one a good feeling when it comes out well.

  10. #69
    Join Date
    Oct 2006
    Location
    adelaide
    Posts
    42

    Default

    yeah sure have enjoyed the finishing......... paint stripping was boring ....

    as for my next project ,,, i gotta put more collar ties on my pergola/deck before it blows away lol

    also a ceiling in my games room ,,,the gardens,,,,,, my ensuit......

    plus starting a 14 million dollar nursing home project at work ,, prolly 60 hours per week

    might get time to squeeze something in but i doubt it ..... i have spotted a kauri side board with plate rack ' all painted up for 150 bucks what do you reckon...............worth a go ?

  11. #70
    Join Date
    Feb 2006
    Location
    USA
    Posts
    402

    Default Is it "old" Kauri

    Buy it, and save it?

    Match it up with the table.

  12. #71
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    1,150

    Default

    If you didnt enjoy stripping the table legs then you really will hate doing a dresser!!
    I did one last year, ended up sending to dippers to get the paint off.
    was sealed with calsomine.
    Funny that one came from SA as well.
    needed a lot of sanding after. but was stunning when finished.
    was about 15 hours work involved.
    but for $150 bucks I'd go for it.
    Find a dipper that uses metholine chloride not costic
    somtimes these have old blue or green paint under the top coat so if your clever you can turn it "french provincial"
    but be carefull not to shabby chic it.

    Astrid

Page 5 of 5 FirstFirst 12345

Similar Threads

  1. Homemade Table Saw/router table
    By funkychicken in forum TABLE SAWS & COMBINATIONS
    Replies: 7
    Last Post: 3rd November 2007, 10:07 AM
  2. What's The Difference Between A Pool Table & Snooker Table & Billiard Table
    By echnidna in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 47
    Last Post: 26th January 2007, 05:09 PM
  3. Router Table and Downdraft Table
    By silentC in forum WOODWORK PICS
    Replies: 27
    Last Post: 23rd November 2006, 05:22 PM
  4. Router Table in Extension With of Table Saw
    By bfrink in forum WOODWORK - GENERAL
    Replies: 2
    Last Post: 11th August 2005, 11:34 PM
  5. Fixing Table tops to Table Base
    By Warrigal in forum WOODWORK - GENERAL
    Replies: 6
    Last Post: 29th January 2002, 12:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •