Thread: Oil Application

Hey, thanks for the tip Paul. I don't know if Danish oil is such a good choice for musical instruments, it is a softer finish which will mark easily, and is not meant to be handled often. A better choice would have been Pollyurathne gloss, which goes very hard & shiny.

Originally Posted by Pariss

Hey, thanks for the tip Paul. I don't know if Danish oil is such a good choice for musical instruments, it is a softer finish which will mark easily, and is not meant to be handled often. A better choice would have been Pollyurathne gloss, which goes very hard & shiny.

Pariss

I understand your comment and you are quite right. Simon manufactures up-market didgeridoos and initially he used botecote which is a super hard two pack used primarily in boat building.

However he wanted a more natural look and in this quest had settled with the scandinavian danish oil, which is a combination of oil and varnish. It is not so hard and durable as the two pack, but has a really beautiful warm look to it. It is still more resilient than straight oil, which if not for durability considerations would be his first choice.

Simon has just finished a couple more didges and I will get some pix to post. They are impressive, but I am seriously biased.

Regards
Paul

Thanks for the tip Paul.
I have found some cloth to be less than ideal too. I mostly use old tea towls and the more washed out the better.
Just as important as the cloth is a dust free place to let it dry. Most times my shed is no good and it gets done on the back deck.
Regards
John

Orraloon

That was exactly it, so-called lint free. Dusty environment was the other issue.

Pariss

When Simon read the posts he pointed out that he originally used the polyurethane gloss over the botecote. Now he is using the scandinavian danish oil over the botecote. Sorry for the misleading information.

Incidentally, he also tried real chamois, but is was nowhere as good as the synthetic product and more expensive.

Regards
Paul

Hey Paul. Looking forward to the Didgeridoo pics. I also like Danish oil, I installed a new hardwood front door and instead of using a polyurethane finish, I went with Feast Watsons Danish oil. Gave it 6 Coates, and it looks amazing, almost 3D!. I'm on a traditional finish kick at the moment, using Shellac flakes and rubbing the finish out, then several Coates of Traditional Wax. I have just finished a replica Tambour clock in Red Tulip Oak, the end finish is like glass, and the colour of the wood looks amazing.

That's a good tip. I have used Danish Oil as a finish and not have any issues as what your son had. I do not have a place to finish the projects in the garage so I take them inside the house front veranda.

Christos

Although in sunny QLD, we are 200Km inland and it is cold this time of year; Too cold for satisfactory finishing so much to our disgust these 2m long didges are brought into the house to be finished!

On top of that Simon works out of a shipping container with all the dust and shavings associated with the hollowing process. Not the best finishing environment.

Regards
Paul

Originally Posted by Bushmiller

Although in sunny QLD, we are 200Km inland and it is cold this time of year; Too cold for satisfactory finishing so much to our disgust these 2m long didges are brought into the house to be finished!

Smart kid.

I needed to look up the word didges.

Well, here you are the latest in the didge offering as promised. Sorry Christos, Simon refers to them by this so often that I have regressed into the same way of speaking.

He also lapses into the vernacular when the manufacturing process lets him down, but I am doing my best to resist that trait. It is difficult when he says he learnt it from me.

He has a couple more didges almost finished and when complete I will place a thread on the musical intruments forum. Perhaps the best aspect of this particular instrument is the sound which is a deep and vibrant resonance.

This one is 1800mm long and 150mm wide at the bell end.

Regards
Paul

Certainly brings out the grain.

I have posted a thread on the music forum with pix of a few didges for those who are interested.

https://www.woodworkforums.com/f98/wo...ridoos-137258/

Regards
Paul

Bushmiller!
Thanks heaps for sharing that trick, I just went out and got a synthetic chamois from Repco and hopefully will be able to try it this weekend.

Those didgeridoos look great, I love the big knots left as is, the wood looks amazing.

Regards
Jason