Results 1 to 12 of 12
  1. #1
    Join Date
    May 2011
    Location
    Melbourne
    Posts
    237

    Default OSMO Polyx Raw on Vic Ash

    Anyone used OSMO Polyx Raw on Vic Ash and care to share a few pictures?. I'm building a dining table for someone and he wants to keep as much of the light colour as possible.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    I used it on a pine table. Never again. It’s peeling in areas of high usage.
    Followed the instruction exactly - even rang them up to ensure correct procedure re sanding and cleaning the surface before coating.

    6402DEB2-4784-40E5-B02D-26F4CD29D576.jpg

    When I rang them re the peeling they said it was my fault as I’d done three coats and you must only do two!

    Just my experience with this product.

  4. #3
    Join Date
    May 2011
    Location
    Melbourne
    Posts
    237

    Default

    This was with the Raw Osmo? I've done a few tables with the satin finish and no problems.

  5. #4
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    That was satin

  6. #5
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    47
    Posts
    1,484

    Default

    Funny you should ask this. I just finished a dining table from recycled tax oak and used the osmo polyx satin.

    I’ve used the satin before and loved it on Blackbutt timber. But I didn’t like it on the tas oak - it turned it a honey kind of colour. Ended up stripping it back and laying down shellac. But that has not handled the moisture and traffic of a dining table. So I’m here looking for alternatives that won’t change the colour too much and will handle the traffic. But not a poly or lacquer that takes a lot of effort to refinish.

    Perhaps an oil?
    Some days we are the flies; some days we are the windscreen

  7. #6
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    4,414

    Default

    Have you considered Livos Kunos clear 244?

    I've used it on Jacaranda & Northern Silver Ash pepper mills. It does impart a slight yellowing but nowhere near the colour change experienced with using Wattyl Stylwood NC 30%. The late Neil Scobie used it extensively on his wonderful work. I'm very happy with it, particularly the ease of use, and the warm soft sheen that it has developed. I sanded to #800 on the PM's.

    Pepper Mills - Minimalist Style.

    KUNOS Natural Oil Sealer #244 - Livos Australia
    Mobyturns

    In An Instant Your Life CanChange Forever

  8. #7
    Join Date
    Apr 2019
    Location
    NSW
    Age
    37
    Posts
    1,126

    Default

    Quote Originally Posted by Trav View Post
    Funny you should ask this. I just finished a dining table from recycled tax oak and used the osmo polyx satin.

    I’ve used the satin before and loved it on Blackbutt timber. But I didn’t like it on the tas oak - it turned it a honey kind of colour. Ended up stripping it back and laying down shellac. But that has not handled the moisture and traffic of a dining table. So I’m here looking for alternatives that won’t change the colour too much and will handle the traffic. But not a poly or lacquer that takes a lot of effort to refinish.

    Perhaps an oil?
    i used Odies oil on my dinning table which is a slab of blackbutt. seems to be holding up fine so far.

    Natural, food safe,solvent free, non-toxic wood finish and stabilizer |Odie'''s Oil|

  9. #8
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    Hello lewisc.

    Hard Shellac won't change the colour of the timber any more than wetting it down with water. It is extremely durable and has been used with amazing longevity on restaurant and café tables for around 12 years with people telling us it's almost like new after all that time.

    Use it on table tops and all horizontal surfaces. It has a high resistance to marking from water, alcohol, heat, etc. as the surface is about as tough as a melamine bench top.

    Use our White Shellac (same thing minus the hardener) for vertical surfaces like legs etc which may be subject to damage from knocks, kicks, children running rampant, etc. as it is easier to repair if needed. Both Hard and White Shellac will give the same look.

    To my knowledge Hard Shellac has ever peeled, worn or delaminated in the well over 12 years that we have been making it.

    Both of the above shellacs are dewaxed bleached shellac the photo's on links show as darker than they really are and the definitely won't darken the timber any more than wetting it down with water. so you won't get that yellow look.

    Hope this is of some help.

    Sorry for the blatant promotion of our products.... No, not really.

    Cheers - Neil

    PS: Don't bother reporting this post as blatant advertising. I'm good friends with the boss...
    PPS: Hehehe... Sorry just couldn't help myself.
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  10. #9
    Join Date
    Jan 2014
    Location
    Sydney Upper North Shore
    Posts
    4,464

    Default

    Do you use Hard Shellac straight out of the bottle or do you thin it ?

  11. #10
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    47
    Posts
    1,484

    Default

    Thanks Neil

    I used your hard shellac. Love it and have used it on many projects. But it hasn’t really held up in this instance. I applied 4 or so 1/8 Strength cuts, then a few 1/4 cuts. Should I be applying more?

    I was going to lightly sand this weekend and recoat.

    Trav
    Some days we are the flies; some days we are the windscreen

  12. #11
    Join Date
    Jul 2008
    Location
    geelong
    Posts
    359

    Default

    Haven't heard of -this traditional poly urethane ,water-based version or something else?

  13. #12
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    Quote Originally Posted by Trav View Post
    Thanks Neil

    I used your hard shellac. Love it and have used it on many projects. But it hasn’t really held up in this instance. I applied 4 or so 1/8 Strength cuts, then a few 1/4 cuts. Should I be applying more?

    I was going to lightly sand this weekend and recoat.

    Trav
    My best (favoured) finish with Hard Shellac follows:

    Decant half of the full strength polish out of the bottle into a glass jar and mix it with 50/50 with 100%IMS. Pour off half of that into another jar and mix 50/50 with 100%IMS.

    If you're brushing it on make sure you have a really good brush. Easiest to get is an artists "Camel hair, Water-colour Mop", available at most half decant art supply shops for around $25. One inch brush is about the best readily available size. This 1" brush will hold more polish than a 5 " brush off the shelf at a paint shop or bunnies, etc.


    • Couple of coats with the weakest mix (make sure all are well stirred or shaken before decanting and before use.
    • Couple or 3 coats of the medium mix until you have almost what you want.
    • One final slowly, purposefully applied coat of full strength. Then leave it alone.


    Do not sand between coats unless you have a problem. If you have a good camel hair mop brush there should be no need to sand as there shouldn't be any witness lines/brush marks in the finish and it doesn't need to be roughed up between coats for grip like poly. It will adhere to itself.

    I have a demo piece that was done this way and it looks as good today as when it was done about 12 years ago. It has been knocked from pillar to post and even had credit card receipts signed on it at shows.

    First coat can be 1 or 2 but on raw timber that's really hungry you may need as many as 4 or 5 until the polish stops soaking into the surface.if ity's a big table you may be able to recoat almost immediately but don't recoat if the surface is not touch dry.

    Hope this is of help.

    Cheers
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


Similar Threads

  1. OSMO PolyX RAW oil - playing around with it
    By FenceFurniture in forum FINISHING
    Replies: 30
    Last Post: 19th June 2018, 07:51 PM
  2. Osmo Polyx 'Raw' first impressions
    By hurcorh in forum FINISHING
    Replies: 15
    Last Post: 9th June 2018, 05:08 AM
  3. Osmo PolyX/top coat
    By qwertyu in forum FINISHING
    Replies: 36
    Last Post: 17th April 2018, 08:34 PM
  4. Compatible stains/tints for OSMO polyx?
    By 44Ronin in forum FINISHING
    Replies: 2
    Last Post: 9th March 2018, 12:41 PM
  5. Osmo Polyx-oil
    By scottbr in forum FINISHING
    Replies: 4
    Last Post: 11th January 2011, 10:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •