Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Painting with Compressor
-
21st September 2012, 05:40 AM #1Member
- Join Date
- Oct 2011
- Location
- South Dakota
- Posts
- 96
Painting with Compressor
I have a nice compressor, 13.4CFM @ 40PSI.
What type of spray gun should I use, for painting wood? Is an iwata knock off, which is normally meant for cars, just fine for interior paint too?
Thanks!
-
21st September 2012 05:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st September 2012, 12:43 PM #2
Exactly what sort of paint are you using.
I use "cheap" gravity fed HVLP spray guns for all my spray painting, which has included auto acrylic lacquers, epoxy enamels and water based interior paints.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
21st September 2012, 03:11 PM #3Member
- Join Date
- Oct 2011
- Location
- South Dakota
- Posts
- 96
-
21st September 2012, 03:44 PM #4
I think latex paint is like our water based "house" paint.
Should spray fine, but will require thinning. I'd use a gravity fed HVLP gun with about a 1.8 or 2.0 tip.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
21st September 2012, 06:17 PM #5Member
- Join Date
- Oct 2011
- Location
- South Dakota
- Posts
- 96
-
12th January 2013, 08:29 PM #6New Member
- Join Date
- Dec 2012
- Location
- Norcal
- Posts
- 1
Re: Painting with Compressor
I'm curious to hear more about this. I've been having a rough time spraying latex with my compressor set up.
Sent from my MB860 using Tapatalk 2
Similar Threads
-
Compressor
By gggggggg in forum GENERAL & SMALL MACHINERYReplies: 5Last Post: 12th July 2012, 11:10 PM -
Which air compressor for spray painting?
By wixy in forum FINISHINGReplies: 15Last Post: 6th June 2011, 02:35 PM -
old compressor
By knight2663 in forum GENERAL & SMALL MACHINERYReplies: 7Last Post: 16th September 2010, 07:21 PM -
Turn your $99 GMC compressor into a $1200 compressor for $85 aud
By honda900fz in forum GENERAL & SMALL MACHINERYReplies: 3Last Post: 7th October 2009, 08:29 PM