Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    4,236

    Default Plywood grain looks terrible after oiling

    I am making three ear ring holders for granddaughters, The top pin board is made of very pale off-white 3mm marine ply from Bunnings. The only trouble is, the grain on this ply is very heavily accented when I applied tung Oil finish to the ply. And I have applied 3 coats

    Can anyone please suggest how to make it look better? Probably too late for these, but in future is there any way I should prepare the pin board first to get nice uniform colour finish?

    I have tried shellac, but the dark grain is still highlighted, but not as bad as when oiled.

    Hoping someone has some really good suggestions
    Attached Images Attached Images
    regards,

    Dengy

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    Could be something to do with the glues? It's probably not going to work after oiling but Oxalic acid is pretty effective at removing stains from wood.

    If you're looking for a nice material to hang earrings from, IMHO black security screen mesh can look pretty good.
    Here's a couple I made for SWMBO a few years ago

    ear1.jpg

    lgstd1.jpg

  4. #3
    Join Date
    Feb 2016
    Location
    Perth WA Australia
    Posts
    828

    Default

    You could try something like a sanding sealer to reduce the blotchiness. However i think you're at the mercy of the grain direction of plywood as this will absorb the finish differently.

    Alternatively you could try and stain the ply rather than using an oil finish.

    Unfortunately too late for these, unless you want to sand the oil completely, but you'll run the risk of sanding through the ply.

    On the other hand i think they look fine.

  5. #4
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    4,413

    Default

    I've looked at the "premium" and "marine" ply at the big green shed a number of times now and I'm still not impressed with its quality, more like a lack of it to be honest.

    The "face" veneers are sanded to within an N'th of their life resulting in a finish thickness which would be far thinner than a sheet of 80gsm paper. That I believe is the major cause of your problems Joe, as what is left of the veneer has very little capacity to absorb the oil finish and the "waterproof" bonding glue prevents it from being absorbed by the layers below.

    I've replaced a number of marine ply floors in aluminium boats and have built a few ply dinghies as well, and have always looked very closely at the ply quality and the thickness of the face veneers before purchase. The boat floors were also treated with Deks Olje which is applied thinned at 75, then 50 then 25% then straight in multiple coats to saturate the outer veneers. The floors have lasted over 15 years in heavy recreational use. I doubt the BGS stuff would last months in the same application.
    Mobyturns

    In An Instant Your Life CanChange Forever

Similar Threads

  1. This is terrible
    By DaveTTC in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 20
    Last Post: 20th December 2013, 10:18 AM
  2. Looks Terrible...
    By Bob38S in forum DUST EXTRACTION
    Replies: 3
    Last Post: 13th April 2012, 11:57 AM
  3. Terrible
    By munruben in forum WOODIES JOKES
    Replies: 4
    Last Post: 25th March 2009, 05:34 PM
  4. Grain filling before Oiling
    By gmcginty in forum FINISHING
    Replies: 25
    Last Post: 16th May 2005, 11:32 AM
  5. mahogany plywood grain raised
    By john52 in forum FINISHING
    Replies: 4
    Last Post: 22nd July 2003, 09:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •