Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2010
    Location
    Ontario Canada
    Posts
    9

    Default Process for Top Coat over Bar & Table Finish?

    I have picked up this Kit
    Code:
    http://www.rustoleum.ca/CBGProduct.asp?pid=55
    But want the sheen to look like these tables
    Code:
    http://www.hdthreshing.com/round-tables.html
    How would i go about sanding the epoxy. I am going to go over it with a tinted polyurethane spray after wards. I just need to know the steps involved to do this as i have next to nil experience in finishing.

    Many Thanks!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    If your (whatever) is intended for standard domestic use - say for a dining table - the best process to get your intended finish would be to jump in the car, drive back to the store where you got the Rustoleum epoxy finish from and get a refund.

    With the money from the refund, buy some finishing oil -maybe Tung Oil or Danish Oil from this mob -and some sandpaper to suit your ROS (to 400 grit at least, till you reach the level of gloss you are after) and have at it. Re-oil when it looks a bit tired.

    If you want to match the exact finish type shown in your example, pick up some Minwax Wipe On poly in a satin finish and follow the directions on the can!

  4. #3
    Join Date
    Oct 2010
    Location
    Ontario Canada
    Posts
    9

    Default

    Thanks Mastersplinter, I really wanted to know what the sanding process is to accomplish my intended look. It is going on a pub/bistro table so i wanted the thick epoxy top.

    Would i use 220 grit to scuff the top so i can apply the satin polyurethane top coat or would that show swirl marks.

    Thanks!

  5. #4
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    For the epoxy coat, if it's used inside I'd first try to matt it down with a coarse car paint cutting compound.

    Get one of the old fashioned compounds that tells you you'll need to use a finishing compound after it, not one of the new-fangled ones where the abrasive breaks down to smaller sizes as you polish; failing that, a grey scotchbrite, 0000 grade steel wool, or 1000 grit (or higher) sandpaper may give you the look you are after.

    Doing a small panel to test on will make fine tuning your gloss level easier.

    If it's for outside you'll need to use the poly approach, as epoxy and UV don't play nicely together.I'd call the manufacturer and find out what their recommendations are for a poly finish as some may not be compatible with the epoxy you are using.

  6. #5
    Join Date
    Oct 2010
    Location
    Ontario Canada
    Posts
    9

    Default

    Quote Originally Posted by Master Splinter View Post
    For the epoxy coat, if it's used inside I'd first try to matt it down with a coarse car paint cutting compound.

    Get one of the old fashioned compounds that tells you you'll need to use a finishing compound after it, not one of the new-fangled ones where the abrasive breaks down to smaller sizes as you polish; failing that, a grey scotchbrite, 0000 grade steel wool, or 1000 grit (or higher) sandpaper may give you the look you are after.

    Doing a small panel to test on will make fine tuning your gloss level easier.

    If it's for outside you'll need to use the poly approach, as epoxy and UV don't play nicely together.I'd call the manufacturer and find out what their recommendations are for a poly finish as some may not be compatible with the epoxy you are using.
    Thank you, Sir I will give that a try and get back to you on the results.

Similar Threads

  1. clear coat for a pallet table?!
    By catch in forum FINISHING
    Replies: 1
    Last Post: 18th June 2012, 05:39 AM
  2. Box finishing process
    By Lyle in forum FINISHING
    Replies: 6
    Last Post: 20th March 2010, 10:54 AM
  3. In the process of ...........
    By Les in Red Deer in forum WOODTURNING - PEN TURNING
    Replies: 7
    Last Post: 24th January 2010, 04:08 PM
  4. My Sharpening Process
    By LineLefty in forum WOODWORK - GENERAL
    Replies: 83
    Last Post: 11th August 2005, 11:46 PM
  5. top coat finish over Danish Oil?
    By Stubarr in forum FINISHING
    Replies: 3
    Last Post: 28th February 2005, 06:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •