Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2008
    Location
    perth
    Age
    79
    Posts
    144

    Question Raw oil and boiled oil

    I've had good results from a mixture made from beeswax, raw oil and turpentine.

    The turps dissolves the wax without being heated then I add the raw oil. I brush on the mixture and use steel wool between coats.

    This seems to work OK.

    Is it better to use boiled oil? Someone says that it's the way to go, but I don't know.

    Has anyone any advice or comments?

    Regards,

    KevinB

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    Basically, Raw Linseed never really quite dries... even though it may soak into the wood and feel dry.

    BLO has metallic driers added, so it dries much faster. (The name is more of a historical hangover than any reflection on how it's made now.)

    It's inexpensive and has a multitude of uses, so the most practical answer is to buy some and try it for yourself.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  4. #3
    Join Date
    Jun 2008
    Location
    perth
    Age
    79
    Posts
    144

    Default Linseed oil ; thanx for the advice

    That's exactly what I needed to know.

    And yes, I've waited weeks for my raw-oil mixtures to dry.

    Thanks again Andy,

    KevinB

  5. #4
    Join Date
    Jul 2006
    Location
    England UK
    Posts
    11

    Default

    I researched this subject for years because I was interested in gun stock finishing.
    It is a subject shrouded in mystery and myth which often leads you up the path to Tru-Oil which could never have been a more unfortunate name if they had deliberately tried . Maybe Tru-Varnish could have been more apt.
    Gunstocks are now in the hands of Varnish sprayers and Poly sprayers Krieghoffs being an example of shiny spray finish .
    But traditional oil finishes still have their admirers .

  6. #5
    Join Date
    Apr 2014
    Location
    Little River
    Age
    77
    Posts
    1,205

    Default

    Quote Originally Posted by KevinB View Post
    I've had good results from a mixture made from beeswax, raw oil and turpentine.

    The turps dissolves the wax without being heated then I add the raw oil. I brush on the mixture and use steel wool between coats.

    This seems to work OK.

    Is it better to use boiled oil? Someone says that it's the way to go, but I don't know.

    Has anyone any advice or comments?

    Regards,

    KevinB
    The version that I used was with pine tree turps and raw linseed oil. I used it on gun stocks hot in summer to enable it to soak in and after many coats had a really nice satin finish that was waterproof and resisted marking.

  7. #6
    Join Date
    Nov 2012
    Location
    SE Melb
    Age
    64
    Posts
    1,277

    Default

    Raw linseed oil does get polymerized but it will take weeks. BLO is already polymerized and it dries in days. Once it's dried, the pores in your gun stock is sealed so the penetrating power of BLO is quite limited. On the other hand, Raw oil keeps getting absorbed over time to produced a mildly water resistant surface.

Similar Threads

  1. Linseed oil boiled or not boiled
    By Wongo in forum FINISHING
    Replies: 15
    Last Post: 8th January 2007, 06:09 PM
  2. Boiled Eggs
    By BernieP in forum WOODTURNING - GENERAL
    Replies: 9
    Last Post: 28th December 2006, 03:39 PM
  3. linseed oil boiled ?
    By paul collins in forum FINISHING
    Replies: 14
    Last Post: 9th September 2006, 08:37 PM
  4. Boiled Linseed oil
    By yenituran in forum FINISHING
    Replies: 3
    Last Post: 15th August 2003, 12:40 PM
  5. Boiled Linseed Oil
    By Rodgera in forum FINISHING
    Replies: 3
    Last Post: 4th January 2003, 11:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •