Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2011
    Location
    newcastle
    Posts
    1

    Default Recoating floors

    Gday everyone,

    I need to recoat my cypress pine floor after doing some renovations. I know for sure that the finish is a water based one.

    My question is how far do I need to sand the boards back? The boards are fairly straight as they were only sanded back about 7 years ago. And what grit should I start at, I've had a suggestion from the hire shop of 120 grit, but being a turner this seems a bit harsh.

    Any suggestions?????????

    Thanks

    Bruce

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    292

    Default

    Hi Bruce,
    If you know the particular name of the product, check out the manufacturer and see if you can do a light sand with some screen mesh and reapply the same product. if not it is probably advisable to sand the varnish off with a belt sander to 120 grit. this is standard. If it is an older home the boards would be top nailed so make sure you sink these and putty prior other wise you will end up ripping papers (and they re not cheap) plus you will have the shiny heads poking through the finish.
    PS unless you want a speckled look, make sure you vacuum thoroughly prior to coating.
    Livos Australia

    <O</O

  4. #3
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    If the boards have stayed flat a light sand with #180 should provide a key for the next coats.
    Cheers, Ern

  5. #4
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    12,746

    Default

    Should add that if the sanding involves taking any timber off, and if Cypress is one of those timbers that darkens due to oxidation or UV exposure, then a complete sand back will be needed.

    I've redone one room with hardwood flooring, on hands and knees with a 75mm belt sander, just to get that key. That worked. Another involved some timber being bared and the colours of the old and the new never evened up and it looks pox.
    Cheers, Ern

Similar Threads

  1. WIll stripping and recoating just ONE spot be ok?
    By Skyscraper in forum FINISHING
    Replies: 2
    Last Post: 9th August 2012, 11:00 PM
  2. recoating table top
    By ellston in forum RESTORATION
    Replies: 3
    Last Post: 11th July 2011, 09:47 PM
  3. Replies: 1
    Last Post: 6th May 2011, 10:24 PM
  4. recoating floating floor
    By chris casey in forum FINISHING
    Replies: 2
    Last Post: 16th September 2008, 09:32 PM
  5. Recoating Stained varnish trim advice
    By NSP67 in forum FINISHING
    Replies: 2
    Last Post: 17th June 2007, 05:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •