Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
11th April 2010, 04:08 PM #1Novice
- Join Date
- Jan 2010
- Location
- Fremantle
- Posts
- 11
Red Wood Table / Jarrah Door Frame exterior protection
I have an old redwood coffee table that has been outside in the elements for the last year. I sanded it back 40 - 60 - 120 grit. Then wife varnished it with some exterior marine varnish (we live near ocean). The varnish is dry, but the surface is still rough. How can i finish the table so that it is totally smooth.
I am using the table as practise before i work on the jarrah door frame (100yrs of grime, dirt, frame is amost grey) on verandah. Have sanded back a small section and the red wood looks great. How do i finish door frame so that it is protected and smooth?
-
11th April 2010 04:08 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th April 2010, 08:56 AM #2Intermediate Member
- Join Date
- Apr 2010
- Location
- Indonesia
- Posts
- 45
To get your finish smooth you need to sand the varnish and redo the varnish application until get the smooth surface. Do thea sanding between the varnish with a sterated sandpaper with 320 or 400 grade.
Do the same way for the door fame
-
14th April 2010, 02:13 PM #3
You'll probably find the first coat of varnish made the wood fibres stand up a little. Light sanding and a couple more coats should do it.
-
16th April 2010, 01:32 PM #4Senior Member
- Join Date
- Mar 2009
- Location
- Hobart
- Posts
- 497
Absolutely spot on advice there. Mind you between the last sanding using 120 and perhaps using 320/400 grade I think it might be wise to use an intermediate grade such as 180-240 and then recoat, then sand back with say the 320/400 and then recoat. Obviously always removing all dust between sanding coats and trying to re-coat in a non dusty environment.
If it still feels rough after that then perhaps you could go further still up to 600 but I reckon you probably shouldnt need to go that far.
Similar Threads
-
Jarrah Frame for Clinker boat table
By Lignum in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 9Last Post: 29th November 2009, 08:41 PM -
Jarrah Coffee Table, Jarrah Burl Bowl and other wood pics
By leighd in forum WOODWORK PICSReplies: 10Last Post: 17th June 2004, 10:08 AM