Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2009
    Location
    Deception Bay, Qld
    Posts
    2

    Default Removing marks from soap finish

    Hi all,

    I've recently refinished a table top with a soap finish. I'm happy with the look and feel of the table, but almost immediately it's had something create a ring mark in the top (not just water - I think some oil). I'm not expecting this to be a hard wearing finish, but having rubbed the area down with more of the soap mix the mark seems unaffected. Is this something I need to sand or scrape back, or are there ways to pull marks out from a soap finish effectively?

    I don't have photos at the moment but hopefully will later tonight.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    1,220

    Default

    G'day mate.
    I hav to ask, "soap finish"? What is that?
    Is it an oil type of finish or a type of wax?
    Knowing what the finish is can help.
    Lyle

  4. #3
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    1,166

    Default

    Lets hear about that... YT.

  5. #4
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    I hav to ask, "soap finish"? What is that?
    It's soap and water and it's about as durable as soap and water.

    it's had something create a ring mark in the top (not just water - I think some oil).
    Usual fix for most problems is more soap wax. Slapped on and then worked over the area that's dulled off. However for that mark it's probably best to wash the whole thing off and start again... Preferably with something a lot more durable.
    However (again with the however ) However it's most, likely as you have already had a go over it with more of the slippery slimy stuff and not fixed it, that the stain is in the timber not the finish and washing the finish off may be the only way to fix it if at all. If as you say it could be oil then the stain may almost be permanent if it's soaked into the surface of the timber which is highly likely.

    Word of warning about soap wax. On some timbers it could react with tannin or other chemical content in the wood and could bring about drastic and/or weird colour changes like gray or green and brown. Also it isn't very durable and works better when made with older style or natural soap. Expect it to mark up pretty easily, especially on tables and bench tops.

    Hope this is of some help.

    Cheers - Neil
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  6. #5
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    As Neil said, soap is not at all durable and I wouldn't use it on any surface that's getting things put on it.

    If it's an oil stain, you'll have to strip it back and start again

  7. #6
    Join Date
    Aug 2009
    Location
    Deception Bay, Qld
    Posts
    2

    Default

    Quote Originally Posted by elanjacobs View Post
    As Neil said, soap is not at all durable and I wouldn't use it on any surface that's getting things put on it.

    If it's an oil stain, you'll have to strip it back and start again
    A bit late coming back to this, but better late than never.

    The marks ended up fading slowly over a period of about a week, and eventually completely disappeared. Since then I've been a little more careful, but overall the surface is holding up very well to general wear and tear, though there's not a lot of that on this surface.

    Some white marks appeared where heavier objects were sitting, but that was just on the surface and wiped away with a dry cloth easily.

  8. #7
    Join Date
    Oct 2015
    Location
    Ringwood, VIC
    Posts
    575

    Default

    Great to hear the end of the story. Makes the thread so much more useful for the next person.

Similar Threads

  1. Aussie Oil and EEE Wax - Removing marks
    By RedShirtGuy in forum FINISHING
    Replies: 2
    Last Post: 15th January 2019, 11:45 PM
  2. Removing Contact Glue Marks
    By Mando in forum FINISHING
    Replies: 3
    Last Post: 19th April 2010, 07:16 PM
  3. removing pencil marks from timber
    By Reno RSS Feed in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 16th February 2010, 11:30 AM
  4. Removing circular marks after polishing
    By Don Nethercott in forum FINISHING
    Replies: 9
    Last Post: 17th August 2004, 07:27 PM
  5. Removing burn marks
    By ivanavitch in forum FINISHING
    Replies: 3
    Last Post: 28th January 2004, 08:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •