Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,350

    Default Sanding block for Hook & Loop abrasives

    I'm looking for a sanding block that will take H&L abrasives (I'll have 75mm wide rolls). I don't seem to have turned up a whole bunch.

    There's Dura-Block, but it sounds like it may be a bit soft for woodwork. Like the idea of the Radius block, but not available in H&L (maybe yet).

    There are a few that take 125mm or 150mm discs, but that means a) wasting part of the disc, and b) possibly fracturing on the bend up the sides.

    Preppin-Weapon and the like all look great but way to slow changing grits - not feasible - that's why I'm after H&L.

    Sandpaper Man has this offering:
    http://www.thesandpaperman.com.au/er...-x-127-mm.html

    and a longer version.

    Mirka have a DE hose version, which can have a curved face attached to it. Not sure how practical the hose hanging off such a lightweight sander would be, but it's certainly a great idea.


    Anyone know of other options? I was surprised to see that Lee Valley had, well, nothing I think it was.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,394

    Default

    Try searching for auto body repair suppliers.
    I vaguely remember having used then 10/15 years ago when I was panel beating.
    Good blocks then come from Europ
    Matt

  4. #3
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    6,394

  5. #4
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    67
    Posts
    2,747

    Default

    There was a discussion going a while ago about using H+L in the 12in disc sanders, and others previously on replacing the hook face on angle grinder pads, which we used to do regularly by rough cutting oversize discs from adhesive backed sheet Hook, fixing them to a cleaned backing disk, then trimming to the disk. When we were doing this, we were using 125mm angle grinders to cut back and dress welds for steel and stainless furniture frames, generally mirror polished. Four to five grinders running 50% of the time over 60hrs per week split shift, we would replace the hook on 1 or 2 pads a week generally.

    I don't see why you cannot convert any normal block that you buy or make to H+L by adding the sheet hook to them. Sandpaper man have self adhesive hook sheets 500 x 305 in stock.

    Remember that hook and loop does change the dynamics of the block, in that it allows more movement than a rigid backing block would, but less movement than a foam surface on a pad might, so they would be a little more likely to say soften a square edge than a solid block might be, and way less inclined to follow the curves of a profiled block for sanding internal curves etc.
    I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.

  6. #5
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,350

    Default

    Quote Originally Posted by malb View Post
    I don't see why you cannot convert any normal block that you buy or make to H+L by adding the sheet hook to them. Sandpaper man have self adhesive hook sheets 500 x 305 in stock.

    Remember that hook and loop does change the dynamics of the block, in that it allows more movement than a rigid backing block would, but less movement than a foam surface on a pad might, so they would be a little more likely to say soften a square edge than a solid block might be, and way less inclined to follow the curves of a profiled block for sanding internal curves etc.
    Yes, hear what you say Mal. It has occurred to me earlier today (when researching) that I have some 2" hook tape (with FIERCE glue) leftover from a project about 25 years ago. I suspect that the glue is still quite ok. So I could actually fashion a block out of timber with rasps, which might be a bit of fun.

    Understand what you mean about the movement of the H&L, although I'd say it will be an improvement on trying to hold a piece of thick cloth backed Colour Coded Grit onto a block manually. There's PLENTY of movement in that!
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  7. #6
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    67
    Posts
    2,747

    Default

    When I was mentioning movement, I may have used the wrong word, ut can't think of an alternative still. Not really referring to the material sliding around on a block so much as compressing and releasing. For example you might use a solid block to sand an edge so that you don't start to round the corners, do the same with a H&L block and the difference in pressure between the section on the surface and the section overhanging would cause the section on the surface to compress slightly, creating a slight radius at the transition from on surface to overhang, and slightly rounding the corner instead of keeping them sharp. Similarly, on a soft block, it will make the block act stiffer.
    I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.

Similar Threads

  1. Bulk cutting of 2" hook and loop sanding discs?
    By rsser in forum WOODTURNING - GENERAL
    Replies: 26
    Last Post: 7th December 2011, 06:04 AM
  2. Hook and Loop sanding paper question
    By hughie in forum WOODTURNING - GENERAL
    Replies: 14
    Last Post: 19th May 2010, 07:11 AM
  3. Velcro Hook & loop
    By tergar37 in forum SAFETY
    Replies: 6
    Last Post: 26th April 2010, 11:21 AM
  4. Glueing hook and loop sanding thingees
    By Arron in forum WOODTURNING - GENERAL
    Replies: 14
    Last Post: 15th June 2008, 11:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •