Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Sealing and Preserving Driftwood
-
1st February 2019, 01:32 AM #1New Member
- Join Date
- Jan 2019
- Location
- Massachusetts
- Age
- 67
- Posts
- 1
Sealing and Preserving Driftwood
Greetings Everyone,
I am a new member so I hope I do things properly. I have a piece of Driftwood that has been drying for 2 years and I now want to seal and preserve it. This piece was found in 4 feet of water lying on the bottom. What makes it so interesting is that not only has it obviously been in a bonfire (it has significant charring over parts of its' "body.", but the wood looks remarkably like an Eel or other type of Sea Creature. From the "Mouth" to the knot "Eye" to the "Fin" on the back. Nothing has been cut or modified in any way. It is exactly as found. It is covered with worm holes and crevasses everywhere. Thus my question. I doubt that using a brush or even a spray would cover and seal it adequately. So I am thinking of basically submerging it in whatever I end up using. It is about 16 inches long. My ultimate goal is to mount it on a nice piece of wood and hang it in my game room. So... my 2 questions are:
Is submerging it the best way to seal this and make sure it is adequately coated? If so, should it hang to dry?
What do you recommend I use to seal it with? A varnish? Lindseed Oil?
I really have no idea and could use some help. Thanks to anyone who takes the time to help.
Driftwood Eel.jpg
-
1st February 2019 01:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st February 2019, 01:37 PM #2GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
No point in sealing it with anything if it is going to be kept in a games room.
A sealing coat will also darken it.
-
2nd February 2019, 07:38 PM #3GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Welcome to the forum too!.
-
3rd February 2019, 10:57 AM #4
If i was to seal it I would use an oil. No varnish.
I have seen a few pieces that do not seem to have a finish applied and wondered about them. They were almost white.
Similar Threads
-
Driftwood drying?
By Shoey in forum WOODTURNING - GENERALReplies: 7Last Post: 16th September 2012, 12:43 AM -
Driftwood
By Grumpy John in forum PHOTOGRAPHYReplies: 3Last Post: 18th April 2012, 03:36 PM -
Driftwood
By john666 in forum WOODWORK - GENERALReplies: 3Last Post: 20th July 2008, 08:44 AM -
Another driftwood box
By jared in forum BANDSAWN BOXESReplies: 3Last Post: 10th May 2006, 10:58 PM -
Driftwood Sculptures
By jamie_driftwood in forum WOODWORK - GENERALReplies: 6Last Post: 22nd February 2005, 08:04 PM