Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2005
    Location
    Brisbane
    Age
    53
    Posts
    350

    Default Shellac on kitchen cupboards...

    I'm refinishing our kitchen cupboards, which are about 15 years old. I had always assumed they were a nitro lacquer with a stain in it. However, in cleaning it up to prep for refurbishing, I gave it a wipe with turps, and the finish seemed to go a little tacky. Anyway, I followed up with some golden oak spirit stain, to touch up the areas where the bare wood was showing through, and the existing finish really went tacky then, and my paper towels started sticking, and any runs of the stain were leaving behind light patches where the old finish was dissolved away. Using a paint scraper, I could scrape off lots of the original finish, scraping up in sticky lumps.

    Is it likely that this is shellac on kitchen cupboards? These were Bunnings cupboards from 15 years ago, with a satin finish. Really not what I expected, but if others are not falling over with surprise that this might be shellac, then I will go ahead and get some fresh flakes, and spray on some new shellac. I don't want the super shiny shellac finish, and I've not had super success with rubbed shellac in the past, so I'm hoping spraying the shellac will be a simple alternative.

    Thoughts anyone?
    Good things come to those who wait, and sail right past those who don't reach out and grab them.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    It's probably just a very cheap acrylic lacquer + a really thin coat + Chinese "quality control" at all stages of manufacture.

  4. #3
    Join Date
    Apr 2005
    Location
    Brisbane
    Age
    53
    Posts
    350

    Default

    Hmm, yes, I wasn't aware that lacquers could be dissolved by metho, but I've looked around, and it seems that some can. Makes it tricky to restain the chipped areas, but maybe I can redissolve the existing lacquer and just spread it around to cover the surface again. I guess I will just continue with my experimenting, and see what works.
    Good things come to those who wait, and sail right past those who don't reach out and grab them.

Similar Threads

  1. Tassie Oak Kitchen Cupboards
    By petal in forum FINISHING
    Replies: 6
    Last Post: 8th March 2013, 12:46 PM
  2. Painting Varnished Kitchen Cupboards
    By Dasvo_50 in forum FINISHING
    Replies: 1
    Last Post: 8th November 2009, 08:29 PM
  3. Kitchen Cupboards WIP
    By lesmeyer in forum WOODWORK PICS
    Replies: 2
    Last Post: 2nd November 2006, 02:15 PM
  4. my kitchen cupboards
    By rick_rine in forum WOODWORK PICS
    Replies: 12
    Last Post: 21st September 2005, 07:55 PM
  5. Finish for Kitchen Cupboards
    By boxers in forum WOODWORK - GENERAL
    Replies: 7
    Last Post: 20th September 2005, 09:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •