Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7

Thread: Steel Wool

  1. #1
    Join Date
    Mar 2004
    Posts
    4

    Question Steel Wool

    Hi Forum

    I notice in many finishes in the forum steel wool is used - is this the rusty type or is it stainless - can bits and pieces become embeded in the timber and stay there ?

    Also I notice different grades are used - I can understand a very fine grades being used but when would you use a course grade.

    Cheers

    COOPES

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2000
    Location
    Geelong South
    Age
    74
    Posts
    507

    Default

    G'day Coopes - Dopn't use steel wool on timber. It is for use on metal and over finishes. The only time it should be permitted on timber is to help with cleaning up after stripping and then care should be taken to remove all traces of it prior to applying a finish.

    Cheers - Neil

  4. #3
    Join Date
    Mar 2004
    Posts
    4

    Smile

    Thanks Neil

    Just looked up a synthetic steel wool - I guess something like we scour our pots and pans with: http://www.nortonconsumer.com/pdfs/synth.pdf

    I am intending to use Danish Oil and 400 grit paper to restore a "country style" kitchen table over its existing mat "varnished" finish - is it OK to sand the oil in over the existing finish or should I get back close to the bare timber?

    Cheers

    COOPES

  5. #4
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    73
    Posts
    11,918

    Default

    Gooday.

    If you are applying any oil you will need to remove any previous finish (unless it was oil) or it won't penetrate but just sit on top.

  6. #5
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    70
    Posts
    2,736

    Default

    Cranking open an old thread for a somewhat different purpose.

    Where can I buy stainless steel wool?

    I have been looking around Bunnings etc and even the local wholesale cleaning products shop, but they only stock ordinary steel wool. There are stainless steel scourers available but not stainless steel wool.

    Ebay has some listed as Muffler wool, but it is quite $$ey.

    Before you ask, there are a lot of voids in the first course brickwork around our house and I want to stuff these with steel wool to keep various four legged things out, but I don't want to seal them completely because they probably still have legitimate weep hole functionality. I figure the steel wool scourers probably could be used, but might be more likely to be pulled out that finer steel wool. Ordinary steel wool would probably rust away fairly quickly.

  7. #6
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    5,271

    Default

    How about using shade cloth? It would last well and be a darned sight cheaper than stainless steel wool.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  8. #7
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    70
    Posts
    2,736

    Default

    Quote Originally Posted by Woodwould View Post
    How about using shade cloth? It would last well and be a darned sight cheaper than stainless steel wool.
    I don't think shadecloth would pack well into tight orifices and I'm not sure it would be rodent proof anyway. The SS scourers are pretty cheap, $3.60 for a pack of 6 at Big W.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •