Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: stiffening the nap
-
18th May 2011, 10:58 PM #1Awaiting Email Confirmation
- Join Date
- Oct 2005
- Location
- Merimbula NSW
- Posts
- 282
stiffening the nap
Hi.
I'm sanding a Qld cedar piece and have lots of 'fur' . I have used dilute white shellac to stiffen it up a bit for sanding with some improvement.
I wonder whether Hard Shellac used in the same way might stiffen the fur more effectively.
Any experience or opinions please?
Regards,
Rob.
-
18th May 2011 10:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th May 2011, 07:47 PM #2
Stick with the white shellac. The hard shellac is recommended for use over a first coat of ordinary shellac. I usually sand to 800, clean with metho, coat with thin shellac and let it dry for about 4 hours just to harden up properly, lightly sand with 800 again, clean off with white spirits and apply finish of your choice.