Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
7th October 2007, 10:58 PM #1Intermediate Member
- Join Date
- May 2007
- Location
- Deception Bay / Brisbane
- Posts
- 47
suggestions required for finishing a Malaysian cedar grandfather clock
I am currently building a grandfather click out of Malaysian cedar and I am starting to think of what finish I should be using. It is a nice deep red colour.
Current thoughts are 2 to 3 coats of Danish Oil wet sanding with 320g then apply a coat of wax to finish.
I may possibly use the UBeaut EEE before the wax.
Any suggestions/comments gratefully suggested. It is much easier to change my mind now than have to strip it off and start again.
I will be applying the finish to the back of the clock first and make sure that it is what I want before doing the parts people will see.
-
7th October 2007 10:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Grandfather Clock
By kevinmcc in forum WOODWORK - GENERALReplies: 10Last Post: 17th June 2007, 09:17 PM -
Cedar Panelling Required for Sauna
By bladelle in forum TIMBERReplies: 2Last Post: 5th February 2006, 04:30 PM -
Looking for Grandfather Clock
By clock hunter in forum WOODWORK - GENERALReplies: 3Last Post: 7th June 2005, 11:37 AM -
Grandfather Clock
By kevinmcc in forum WOODWORK - GENERALReplies: 0Last Post: 3rd February 2005, 03:36 PM -
Grandfather clock
By kevinmcc in forum WOODWORK - GENERALReplies: 12Last Post: 18th December 2004, 10:44 PM