Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 14 of 14
  1. #1
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    1,540

    Default Tung Oil - Waxy Residue

    Guy's, this one has me stumped.

    One of the guys in my office made a push along truck for his grandson. He decided to finish it with Tung Oil and as instructed on the can diluted the first 2 coats with White Spirit.

    He tells me that as it dried, a waxy residue seemed to form on the surface. Just like wax it rubbed off but again repeated for the second coat and again on the undiluted final coat.

    I've not met or heard of this before, even in the cold we are experiencing (it being winter here).

    Any ideas appreciated.
    Dragonfly
    No-one suspects the dragonfly!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    2,178

    Default

    Sounds bizarre!
    What kind of wood?
    Any prepping done prior to oiling (wipe down with some product)?
    How was it applied. (Brush,cloth..)

    It sounds like a reaction between the White Oil and some other compound in or on the timber. He may be best to try the procedure using pure Tung Oil on a piece of left over wood. But with no other substances being used before oiling.

    Regards,

    Rob

  4. #3
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    1,540

    Default

    LGS,

    sorry, why is it you can never think of all the information that might be needed to help answer a question.

    The wood is Steamed Beech - (yeah a UK timber I'm afraid) no base coat of anything, just sanded smooth.

    Normally a fantastic wood to work with and takes almost any finish you can apply.

    You're thinking the same as me, a reaction between the Tung and solvent, but I've never heard of it before.
    Dragonfly
    No-one suspects the dragonfly!

  5. #4
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    4,924

    Default

    Did he use metho or shellite/turps?

  6. #5
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    1,540

    Default

    He said White Spirit, I've no idea if you have the same name for it. Definitely not Meths (Metho).

    Wikipedia gives me this,, hopefully one of the names is the one you guys use, White Spirit, a Turps substitute.
    Dragonfly
    No-one suspects the dragonfly!

  7. #6
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    4,924

    Default

    cool, as long as it was not metho. I think it's probably just the cool weather.

  8. #7
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    2,178

    Default

    Hi Mic,

    I was inclined to think it is cold weather as well and the more I think about it, the more I agree with you. Just one more thing, who's Tung Oil is it. Is it really pure Tung Oil or has it got additives? If so, the reaction may be cold + hardener in the Tung Oil.

    Regards,

    Rob

  9. #8
    Join Date
    Jan 2002
    Location
    Sunshine Coast, Qld
    Posts
    533

    Default

    That waxy residue could be just excess tung oil rising to the surface. Just wipe it off as it appears over the next day or so. Use less in subsequent coats.
    Rusty

  10. #9
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    1,540

    Default

    Rob,

    Two questions I also asked. The Tung oil is from Liberon, and as he'd never used it before a new can. So I'm happy with the quality of the oil.

    The spirit is a generic 'Big Shed' stuff but I don't think you can mess that up.

    Like you all, I keep coming back to the cold & damp we've got, but again it's something I've never seen or heard of before - feelong really confused.com over this one!
    Dragonfly
    No-one suspects the dragonfly!

  11. #10
    Join Date
    Dec 2015
    Location
    Tasmania
    Age
    57
    Posts
    1

    Default

    Quote Originally Posted by dr4g0nfly View Post
    Rob,

    Two questions I also asked. The Tung oil is from Liberon, and as he'd never used it before a new can. So I'm happy with the quality of the oil.

    The spirit is a generic 'Big Shed' stuff but I don't think you can mess that up.

    Like you all, I keep coming back to the cold & damp we've got, but again it's something I've never seen or heard of before - feelong really confused.com over this one!

    Hi, I know its a bit late but I have heard that some white spirit or turps substitutes have water in them which will not mix with the tung oil

  12. #11
    Join Date
    Nov 2015
    Location
    Whangarei, New Zealand
    Age
    70
    Posts
    282

    Default

    I thin tung oil with vegetable turps. Never had problems, but never tried it on beech.
    Wish I could get beech here, for some purposes.

    I believe there are at least 3 kinds of tung oil out there:
    real untreated raw tung oil
    heat treated tung oil (supposed to make it set faster)
    tung oil with additives that are supposed to make it set faster
    (not to mention tung oil that isn't tung oil at all).

    I would not take any bets on what would happen with the heat treated and the additive rich stuff when thinned with {whatever}.
    Should be ok if it says so on the tin though. (see below)

    As I recall from my stay in England, white spirits was basically clean petrol, no? Or maybe I'm getting it mixed up with the white spirits in NZ which IS octane
    without lead, dyes et cetera...
    So frustrating when English speakers in different countries use the same name for different products, and different names for the same thing.

  13. #12
    Join Date
    Mar 2003
    Location
    Newcastle
    Age
    69
    Posts
    1,071

    Default

    The main thing is to wipe then buff off the oil ten or twenty minutes after application, especially when it is cold. Any oil that doesn't penetrate the wood just sits on the surface and slowly sets/dries into a horrible waxy sticky stuff.

  14. #13
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    5,773

    Default

    Lets get a few things straight ...White Spirit .... is clean white hydrocarbon ..... pretty much the basis for many things including petrol and turps..... generally not considered reactive and it dries without leaving residue ...... that is why you use it.

    It is not hydroscopic.

    It should not be confused with Metolated Spirit which is alcahol and is definitely hydroscopic and always has some portion of water in it ...... however you can commercially buy 95% metho, that contains 5% or less water.

    It is also not Parafin oil ..... which is also a clean white hydrocarbon but more like an oil ...... good for cutting boards.

    As has been mentioned the waxy residue is probaly un absorbed Tung oil and the rement after it has reacted with air. ....... Tung oil from memory is a nut oil and like most nut oils has some waxy component.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  15. #14
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    84
    Posts
    2,713

    Default

    Quote Originally Posted by P.W.H. View Post
    So frustrating when English speakers in different countries use the same name for different products, and different names for the same thing.
    Paraffin Oil is now officially called Liquid Paraffin in Australia, and in the UK, Paraffin is what we call Kerosene.
    Tom

    "It's good enough" is low aim

Similar Threads

  1. best waxy white shellac supplier ?
    By JDarvall in forum FINISHING
    Replies: 7
    Last Post: 15th February 2012, 07:00 AM
  2. Old Paint Residue
    By James Fox in forum WOODWORK - GENERAL
    Replies: 5
    Last Post: 17th August 2010, 11:24 AM
  3. Linseed oil residue
    By timdavis@activ8 in forum FINISHING
    Replies: 3
    Last Post: 7th November 2008, 04:07 AM
  4. Beefwood - waxy ?
    By reeves in forum WOODTURNING - GENERAL
    Replies: 8
    Last Post: 15th September 2007, 01:28 PM
  5. EEE residue removal
    By hughie in forum FINISHING
    Replies: 5
    Last Post: 1st November 2006, 11:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •