Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Old Varnish
-
8th February 2011, 09:16 PM #1Senior Member
- Join Date
- Jan 2011
- Location
- Port Macquarie
- Posts
- 128
Old Varnish
My first post. I inherited a 1/2 gallon metal container of "Fine Hard Oak Varnish V206" made by Australian United Paint Company. It was my Grandfathers, he died nearly 50 years ago and I've had it for 30+ years. It is sealed by solder - never opened and is still liquid ie I can slosh it about. Is this considered a good finish or are modern varnishes better. i had been keeping it for potential restoration of old presumably oak furniture but I've never started. Should this be used all at once, decanted into smaller bottles or kept as a historical relic. Advice would be welcome. Anodyne
-
8th February 2011 09:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th February 2011, 10:58 PM #2Intermediate Member
- Join Date
- Apr 2010
- Location
- Indonesia
- Posts
- 45
Just do some trial on a piece of wood panel.
See the result, if it can dry then your varnish is still in good condition.
Good luck
wisnoLast edited by Moderator; 26th August 2011 at 09:51 PM.
-
13th February 2011, 09:12 AM #3
Think you'll find that United Paint was taken over by BALM (British Australian LEAD Manufacturers) some time around the 1920's.
This could give you an idea what sort of heavy metal driers are used in the product. It may still be good but I wouldn't be using it around anything for children, think I'd be inclined to sell it to an antique dealer. Might be worth a few dollars for the can and original label if still in tact.
Cheers - Neil
PS BALM changed it's name to Dulux in the late 60's early 70's
Similar Threads
-
Varnish
By teasea in forum BOAT BUILDING / REPAIRINGReplies: 6Last Post: 15th March 2011, 10:26 PM -
Wet on Wet for Varnish?
By Hawk in forum BOAT BUILDING / REPAIRINGReplies: 27Last Post: 2nd November 2009, 04:14 PM -
About varnish
By budgieman in forum FINISHINGReplies: 12Last Post: 11th December 2008, 06:34 PM -
Varnish Help!
By Dennis Millard in forum FINISHINGReplies: 8Last Post: 19th February 2008, 01:17 PM -
Best Varnish???
By ynotTony in forum FINISHINGReplies: 8Last Post: 20th May 2007, 01:55 AM