Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Varnish turns white
-
31st December 2011, 10:49 AM #1
Senior Member
- Join Date
- Oct 2008
- Location
- Bouvard - Western Australia
- Posts
- 325
Varnish turns white
Wattyl Estapol Varnish.
I sprayed a burl platter with Wattyl Matt finish & left overnight. The next morning I was surprised to find all the little indents, holes & cracks were white.
This is what the Wattyl rep’ told me
All Varnish is originally made in Gloss. To turn Gloss finish into a Semi-gloss, a fine white powder is added. To make it a Matt finish more white powder is added.
Apparently when spraying a flat surface it is not noticeable, it is only on irregular surfaces it is really noticed.
I just happened to be unlucky & get a bad batch. Although he gave me some thinners the burl was completely ruined as at that time I did not own a Longworth chuck or anything else that would allow me to re-turn the platter.
Hope this helps someone.
Cheers
ColChucks are like potato chips....you can't have just one.
www.bouvardbush.com
http://www.mandurahwoodturners.com/
-
31st December 2011 10:49 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st December 2011, 12:56 PM #2
GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,566
Do you have any idea what the moisture content was in the burl and was it humid when the finish was applied?
-
1st January 2012, 09:16 AM #3
Senior Member
- Join Date
- Oct 2008
- Location
- Bouvard - Western Australia
- Posts
- 325
The burl was completely dry, it ha been in my shed for about 5 years & was cut down years before that. There was very little humidity .
The rep' said there had been a fault with in the mixing process & way too much powder had been added.
ColChucks are like potato chips....you can't have just one.
www.bouvardbush.com
http://www.mandurahwoodturners.com/
-
1st January 2012, 09:24 AM #4
Retired Member
- Join Date
- Nov 2006
- Location
- Bendigo Victoria
- Age
- 80
- Posts
- 16,560
Doubt whether this was caused by a bad batch of Matt Varnish, if it was then it would show up in the flat areas of the burl as well.
What is probably the cause of your white appearance in the low areas is that too much varnish was sprayed on wet-on-wet which then collected in the low areas giving excessive film thickness there and showing up as white caused by the silica based matting agent in the varnish.
This could have been overcome by multiple thinner coats being applied.
-
3rd January 2012, 08:14 PM #5
GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
White or frosted appearing 'clear' finish is also a problem for painters of war games figures. One of the recent 'cures' discovered is to apply Olive oil to the afflicted paint job
Dust, Tears & Dice: Matt Varnish Frosting... A solution ?
beats soaking it in paint stripper and starting again.
Reply With Quote
Similar Threads
-
what is the defference between cellulose varnish and syntitic varnish
By kadirou830 in forum FINISHINGReplies: 2Last Post: 18th September 2011, 07:19 AM -
Wongo turns 39
By Waldo in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.Replies: 20Last Post: 22nd May 2009, 04:28 PM -
Southern Star - White Wheel Or White Elephant?
By Metal Head in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 2Last Post: 4th February 2009, 01:51 PM -
As the worm turns
By Capt. Zero in forum WOODWORK - GENERALReplies: 10Last Post: 3rd September 2007, 09:17 PM
