Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: waterbased varnish help
-
12th October 2005, 09:20 PM #1SENIOR MEMBER
- Join Date
- May 2005
- Location
- Lake Macquarie
- Posts
- 864
waterbased varnish help
anyone have any experence with waterbased varnish/poly, whatever...i tryed the cabbots but it just doesn't leave a crystal clear finish as say feast watson satinproof, but i need a quick dryer and i don't have spray equip. not that i would have the room or air flow for spraying anyway , so it's got to be quick drying and brush or wipe on..
any sugestions... anyoneHurry, slowly
-
12th October 2005 09:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th October 2005, 09:48 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
I find the H2o based finishes dry cloudy.
I dont use them any more.
Al
-
12th October 2005, 10:21 PM #3SENIOR MEMBER
- Join Date
- May 2005
- Location
- Lake Macquarie
- Posts
- 864
YES !!! they dry cloudy , my experiences exactually...
...so whatt's tthe solution...Hurry, slowly
-
12th October 2005, 10:35 PM #4Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Dont use them.
Al :confused:
-
12th October 2005, 11:05 PM #5SENIOR MEMBER
- Join Date
- May 2005
- Location
- Lake Macquarie
- Posts
- 864
i mean what can i use that is fast drying and can brush or wipe on ...
Hurry, slowly
-
13th October 2005, 04:48 PM #6
Cabots Crystal Clear does not dry cloudy if you follow the instructions.
http://www.cabots.com.au/Project%20G...t/Next_265.asp
Growing old is much better than the alternative!
-
13th October 2005, 04:54 PM #7
-
15th October 2005, 12:53 AM #8SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Nambour Qld
- Age
- 88
- Posts
- 688
I've used Crystalac, which I got from Gregorys, on a few items. It dries fast, clear, and without brush strokes. And a little seems to go a long way.
Kind regards
Brian
-
15th October 2005, 09:05 PM #9SENIOR MEMBER
- Join Date
- May 2005
- Location
- Lake Macquarie
- Posts
- 864
i looked at there website but could not find any Crystalac...where could i get some more intel for this...
Hurry, slowly
-
15th October 2005, 09:09 PM #10
Similar Threads
-
Wipe on varnish over french polish
By Pavel in forum FINISHINGReplies: 17Last Post: 22nd June 2005, 02:55 AM -
varnish problem
By leon spinks in forum FINISHINGReplies: 2Last Post: 10th December 2004, 10:51 AM -
Varnish problems
By massmtnbikn in forum FINISHINGReplies: 6Last Post: 10th December 2004, 02:43 AM -
Varnish skinning in the tin
By Oldblock in forum FINISHINGReplies: 10Last Post: 28th June 2004, 04:58 PM -
Marine Varnish
By dawallace45 in forum BOAT BUILDING / REPAIRINGReplies: 14Last Post: 2nd June 2004, 11:18 AM