Needs Pictures: 0
Results 1 to 10 of 10
Thread: Double cutaway acoustic
-
24th September 2020, 01:53 PM #1Member
- Join Date
- Jan 2019
- Location
- Queensland
- Age
- 50
- Posts
- 63
Double cutaway acoustic
I haven't been here for awhile but here's a recent build.
As usual its unusual.
Its an idea I've been kicking around since 2003 and has finally become a reality,
Double cutaway thinline acoustic.
Camphor Laurel back and sides
Silver Quandong top
Tasmanian Oak neck and fingerboard
Hand cut Bunya pine kerfing and tone bars
Slotted the kerfing by hand as certain areas required extra slots.
Camphor Laurel binding with contrasting Australian hardwood stripe
Redback stripe on back
Named the Redback because this little beauty packs some serious bite.
Basic handtools and a bending iron
A few electrics on the workbench but looking forward to starting another acoustic soon.
KirbyMD
-
24th September 2020 01:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th September 2020, 11:20 PM #2
Very nice piece of art there Kirby!
If you never made a mistake, you never made anything!
-
30th September 2020, 08:40 PM #3Member
- Join Date
- Jan 2019
- Location
- Queensland
- Age
- 50
- Posts
- 63
Thank you Shedhand, I do like art you can interact with.
-
15th October 2020, 09:01 AM #4GOLD MEMBER
- Join Date
- Feb 2015
- Location
- Strathalbyn South Australia
- Posts
- 1,141
Wonderful work there Kirby!!!
-
15th October 2020, 06:42 PM #5Member
- Join Date
- Jan 2019
- Location
- Queensland
- Age
- 50
- Posts
- 63
Thanks Cal,
I'm really pleased with how it turned out.
Its now in a music store with a couple of my other builds, I dropped in the other day to see them together for the first time and couldn't believe how well the little Redback acoustic looked beside the Houndstooth electric.
Inspired to build more.
KirbyMD.
-
15th October 2020, 06:57 PM #6GOLD MEMBER
- Join Date
- Feb 2015
- Location
- Strathalbyn South Australia
- Posts
- 1,141
Awesome! I’m sure they will sell well. How is the new block working out for you? Do you have a home on it yet?
-
16th October 2020, 09:39 PM #7Member
- Join Date
- Jan 2019
- Location
- Queensland
- Age
- 50
- Posts
- 63
Thanks for your confidence in the guitars Cal,
They are getting some attention but I do need to work on the brand awareness issue.
The new block is actually an old block that my wife has owned since before we met, it does have a house on it but squatters had trashed it, they took appliances outside and threw them back in via the windows, open paint tins also entered via the windows. Paint and glass sticks really well to floors and walls. Its all cleaned up now, just need to re plaster one room.
Workshop is in 1 of 2 40ft containers, no power yet which is fine with me as I predominately use basic handtools anyway.
Your workshop is looking great by the way and lots of uke builds on the go!.
-
20th October 2020, 02:35 PM #8GOLD MEMBER
- Join Date
- Feb 2015
- Location
- Strathalbyn South Australia
- Posts
- 1,141
You’re welcome!
Wow! some people like destroying stuff for no reason, I can’t understand it at all. Glad you got it all sorted!
You mentioned previously that you use only hand tools, amazing and hats off to you! I couldn’t get by without power as you have seen!
-
20th October 2020, 04:09 PM #9Member
- Join Date
- Jan 2019
- Location
- Queensland
- Age
- 50
- Posts
- 63
Ive got power via an extension lead to run my laminate trimmer, charge the drill and run the bending iron. The laminate trimmer is such a versatile little power tool, binding rebates, pickup routes and recently even thicknessing some electric tops. When things pickup there are plans for a decent linisher and drill press, some power is essential.
The fun I could have in a setup like yours, especially when something like this slab comes along.
A salvaged find that looked promising, obviously I don't have power saws so I took to it with a handsaw,
The entire time I'm thinking 'yeah, this is stupid. Get a bandsaw at least.'
Your setup would have made short work of this, a few electric tops, a couple of back and side sets.
It'll be worth it but I'll be thinking of your workshop while I slowly get it done.
-
20th October 2020, 05:55 PM #10GOLD MEMBER
- Join Date
- Feb 2015
- Location
- Strathalbyn South Australia
- Posts
- 1,141
Good that you have a bit of power then!
Yes the trimmer is a great tool, I use mine more than a large router. I forgot about the bending iron, of course you would need power for it!
Yes the bandsaw is a definite time saver, I could imagine how hard it would have been cutting that slab open. A friend was asking recently what the most useful machine in my shed was, with out a doubt it would be the bandsaw. I have a triton 2000 that I now only use occasionally due to the bandsaw cutting the bulk of my timber.
I have accumulated my kit over the last 30+ years and very little of it was new or expensive, it’s only been the last five years that I have had a dedicated shed to make use of it all. I feel a bit lucky that I have what I wanted for all these years now, I just need more free time to do the work!
You have done very well with limited resources Kirby, it’s awe inspiring for sure! I can’t wait to see what else you come up with!
Similar Threads
-
gibson double cutaway
By arran101 in forum MUSICAL INSTRUMENTSReplies: 118Last Post: 13th August 2010, 05:13 PM -
Wedge tail eagle double cutaway
By peterbrown in forum MUSICAL INSTRUMENTSReplies: 9Last Post: 12th April 2010, 08:47 PM -
PRS double cutaway plans or template.
By asteam in forum MUSICAL INSTRUMENTSReplies: 4Last Post: 26th August 2009, 07:59 PM -
Cutaway Dread
By Different in forum MUSICAL INSTRUMENTSReplies: 18Last Post: 8th September 2008, 11:48 PM