Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
20th March 2007, 06:18 AM #1
Guitar body vise ?? -- What do you use
I am just after some ideas on how to hold the Guitar body on the bench while I work on the sides and ends etc.
I have heard of a kind of "Bench pipe clamp" arangement but I am not too sure what it is.
Any ideas?
Greg
-
20th March 2007 06:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th March 2007, 08:04 AM #2Senior Member
- Join Date
- Sep 2006
- Location
- melbourne
- Posts
- 221
i saw this recently and like the idea.....i might make one at some point if i need something for this purpose...http://www.luthiersforum.com/forum/f...0&PN=5##152164
-
20th March 2007, 08:47 AM #3
Look here for a pipeclamp guitarjig thing:
http://www.talkbass.com/forum/showpo...6&postcount=45
the whole thread is interesting too.
-
20th March 2007, 09:10 AM #4Senior Member
- Join Date
- Jan 2005
- Location
- Como NSW
- Age
- 58
- Posts
- 243
Have a look at Sylvan Wells' website for the pipe clamp guitar holder http://www.wellsguitars.com/Articles/Guitar_Holder.htm I built one of these and they work great. Best of all you can demount it from your bench when you aren't using it.
-
20th March 2007, 09:11 AM #5Senior Member
- Join Date
- Sep 2006
- Location
- Melbourneish
- Age
- 55
- Posts
- 128
here's my set up. No way near as classy as both of those links! It took me about half an hour to rig up, several years ago now, and has served its purpose well. That box shaped one looks pretty nice though!
Jack
-
20th March 2007, 09:57 AM #6
My vice is more low tech....a piece of padded MDF held to bench with cam clamps. Once you find four people to help you line it up it works fine.
Whatever note you blow youre never more than a semitone away from the correct one....(Miles Davis)
-
20th March 2007, 08:03 PM #7
Thanks again guys for the "quick" replies and help.
Looks like I have something else to build....
Cheers
Greg
-
24th March 2007, 10:18 AM #8
I went down to Carba Tec and picked up a couple of cheap Pipe clamps -
($15.00 each), a couple of bits of pipe and flanges ($10.00 the lot) (complete hardware)
NOTE: Bunnings - Would have cost about $35.00 fot the pipe etc, if they had the flanges...
So now to stick it together!
-
26th March 2007, 02:06 PM #9
Pic of Vise
I thought I would post the pic of the Vice.It works like a dream - Cost only about $60.00
This is the Guitar Vice .
Her is what its for.
Similar Threads
-
Filling screwholes in guitar body (also need to redrill them). What to use?
By BoogieMan in forum WOODWORK - GENERALReplies: 6Last Post: 19th July 2006, 10:57 PM -
Bass Guitar neck and body
By timberpassion in forum WOODWORK - GENERALReplies: 14Last Post: 6th March 2006, 01:15 PM -
Mirror finish with dulux on guitar body
By old_picker in forum FINISHINGReplies: 8Last Post: 13th July 2005, 08:51 AM -
finishing a guitar body - where to start?
By old_picker in forum FINISHINGReplies: 6Last Post: 28th April 2005, 06:12 PM -
Guitar body
By Strungout in forum WOODWORK - GENERALReplies: 1Last Post: 28th July 2003, 06:40 PM