Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2007
    Location
    Caboolture, QLD, Aust
    Posts
    236

    Default Guitar modifications...

    My daughter has bought herself a guitar which doesn't have a knob at the bottom for attaching a strap. Is it going to harm it if I simply screw on a small knob? It's not the greatest guitar in the world but I don't want to ruin it through ignorance on my behalf.

    Sent from my SM-N975F using Tapatalk

    Cheers
    Redbeard

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 2011
    Location
    Melbourne
    Posts
    237

    Default

    Acoustic or electric? Electric bodies are solid so no problem and acoustics should have a solid piece on the inside where the strap should go.

  4. #3
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    Be sure to drill an appropriate size hole for the screw first. Screws are fairly soft so you could strip the head or snap the screw. If it’s an acoustic you could split the tail block if you don’t pre drill it.
    Cheers Cal

  5. #4
    Join Date
    Nov 2007
    Location
    Caboolture, QLD, Aust
    Posts
    236

    Default

    Yes, it's an acoustic. You can see a seam at the bottom where the two side pieces come together, I assumed there'd be a bit of framing behind that which a knob could be screwed into. I'm just dotting the Is and crossing the Ts.

    Thanks guys.

    Sent from my SM-N975F using Tapatalk

    Cheers
    Redbeard

  6. #5
    Join Date
    Oct 2015
    Location
    Ringwood, VIC
    Posts
    575

    Default

    Should be fine. If you are concerned, see if you can have a look with a little mirror and torch. But I'd be pretty confident.

Similar Threads

  1. X2 Modifications
    By KBs PensNmore in forum METALWORK FORUM
    Replies: 9
    Last Post: 23rd January 2015, 06:35 PM
  2. Modifications to outboard cut-out
    By SoLong in forum BOAT BUILDING / REPAIRING
    Replies: 3
    Last Post: 6th January 2012, 09:59 AM
  3. MC900 modifications
    By Tiger in forum WOODTURNING - GENERAL
    Replies: 16
    Last Post: 24th November 2009, 06:50 PM
  4. X4 Modifications
    By seafurymike in forum CNC Machines
    Replies: 6
    Last Post: 16th June 2009, 11:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •