Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Plans for Rosewood Guitar Stand
-
6th March 2008, 05:47 PM #1
Plans for Rosewood Guitar Stand
I've been putting together plans to build a A frame guitar stand, based on my trusty metal one.
It's for my father-in-law's bday, using wood recycled from his old house. (I really don't like using recycled timber... people have put about 4 coats of pain (likely lead based) over rosewood... bizzare!, but anyway, nails out and hand planing.)
Not sure on a hinge mech, yet.
Grey stuff in pic is leatherwork.
Keen to mix in other woods... not sure what at the moment only got huon, radiata, blackwood, and myrtle, bit of tas oak.
Any thoughts?
-
6th March 2008 05:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th March 2008, 05:56 PM #2GOLD MEMBER
- Join Date
- Aug 2007
- Location
- Brisbane
- Posts
- 1,156
How heavy are the guitars, and will it be for gigging or using in the house? I flat out would not trust one of my solid body basses to that unless the arms that hold the weight were metal and pretty solidly attached. I would be worried that wood would flex or break. Particularly at a gig, because you're not always as careful as you should be. If you wanted it to be all wood, I would change the design a bit - maybe have some supports or even a panel between the feet and the guitar supports for some extra strength. I have to say I like the idea though - much better looking than the run of the mill stands.
PeterThe other day I described to my daughter how to find something in the garage by saying "It's right near my big saw". A few minutes later she came back to ask: "Do you mean the black one, the green one, or the blue one?".
-
6th March 2008, 06:15 PM #3
Guitar is a maton accoustic.
For around the house. I wouldn't take a handmade rosewood guitar stand to a gig, but that's just me.
THanks for suggestions... processing...
Just found some sites worth checking...
http://www.slayframe.com/
http://www.music123.com/Taylor-Maple...42285.Music123
http://www.slayframe.com/
-
6th March 2008, 08:07 PM #4
Leave out the radiata. All the other timbers look fine together. If you have a dog, it might chase the radiata if you throw it. Mine won't (Tasmanian dogs), but some will.
If your joinery is sound, the stand will be sound. I look forward to seeing it, I hate these cheap aluminium ones I have.
cheers.
-
6th March 2008, 09:00 PM #5
I'm usually quite a lot of radiata at the moment... been building sleds hotglued to other wood to go through the thicknesser.
-
7th March 2008, 11:03 AM #6
-
11th March 2008, 09:31 AM #7New Member
- Join Date
- Feb 2008
- Location
- Ireland
- Posts
- 4
This may be somewhat crude, and I still have some work to do before it's finished but here goes anyway. My answer for a collapsible A-Frame floor stand for my 5 string banjo. Design and execution was limited due to my lack of experience, tools or workshop. e.g. I had to cut slots for the opening restrictor arm as I don't have access to a router.
Basic barrell hinge at top. Provided good non slip padding is used the toes at the bottom of the stand doesn't need to kick up due to banjos weight and low centre of gravity.
Similar Threads
-
guitar stand
By abcini in forum WOODWORK - GENERALReplies: 3Last Post: 20th September 2008, 06:48 PM -
Guitar plans with cutaway
By thetassiebfg in forum MUSICAL INSTRUMENTSReplies: 10Last Post: 2nd September 2006, 12:03 PM -
guitar stand
By abcini in forum HAND TOOLS - POWEREDReplies: 2Last Post: 29th September 2003, 07:47 PM -
guitar stand
By abcini in forum WOODWORK - GENERALReplies: 6Last Post: 14th September 2003, 01:36 PM