Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
25th February 2008, 07:47 PM #1
Nakamichi Soundspace 5 power supply pin-out details required!
Does anyone have, or know where I could find the pin-out details for a Nakamichi Soundspace 5 power supply?
I'm trying to fix one for a work colleague; it left his last house without the plug that connects the power supply to the main unit (it was wired through a wall, and cutting the plug off the end of the lead was the expedient solution to pulling the wire back through the wall).
Unfortunately he didn't think to save the plug, so I am clueless as to which pin on the main unit each of the five wires connects to!
-
25th February 2008 07:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th February 2008, 09:19 PM #2
-
26th February 2008, 08:45 PM #3
That would be appreciated...the local service agents are...lacking in any service whatsoever!
-
13th April 2008, 09:22 AM #4Senior Member
- Join Date
- Aug 2006
- Location
- Oyster Bay NSW
- Posts
- 120
Pin 1 - 13 VDC (Unregulated) ) Via 10 Amp fuse.
Pin 2 - 0 VDC )
Pin 3 - 0VDC )
Pin 4 - 15VDC (Unregulated) ) Via 2 Amp fuse.
Pin 5 - 14.5 VDC (Via 10k Ohm series resistor) )
Save yourself the trouble. Don't try to fix it. The reason why Amber dumped Nakamichi, is because the stuff is incredibly troublesome, hard to obtain parts for and very expensive to service.
Yes, I am a Nak service agent. It is, by far, the least profitable line I've ever serviced.
-
13th April 2008, 04:03 PM #5
Thank you muchly!
The owner of it has already replaced the power supply once (left the original in a wall) at a cost of $300...so I know what you mean about expensive parts.
Similar Threads
-
Power Supply Wanted......
By Landseka in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 3Last Post: 1st June 2006, 01:16 PM -
Question about power supply to tools
By jshaw in forum HAND TOOLS - POWEREDReplies: 38Last Post: 5th September 2005, 10:44 PM -
Questions on power supply
By Arron in forum HAND TOOLS - POWEREDReplies: 9Last Post: 1st January 2004, 02:01 PM