Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
8th September 2015, 11:56 PM #1Intermediate Member
- Join Date
- Jan 2015
- Location
- Victoria
- Posts
- 29
Table Saw Blade with Flat Cut for Slots
Hi,
I'm after suggestions for a Table Saw blade, 10", to cut slots in timber for sliding 3mm mdf into. I wonder if there's any in Australia for around $50 - $100?
I'd like to get this one off ebay http://www.ebay.com.au/itm/121166694...%3AMEBIDX%3AIT however would like to buy in Australia if possible.
Thanks.
-
8th September 2015 11:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th September 2015, 01:28 AM #2GOLD MEMBER
- Join Date
- Oct 2014
- Location
- Caroline Springs, VIC
- Posts
- 1,645
I bought a 300mm ripping blade from Timbecon last week. The price was right, and they had a special on them, win win . blade was sharp out of the box producing long curly shavings rather than creating nothing but dust. the 300mm blade had a 4.2mm kerf, but the website (which only has limited information about most products) says these blades have 3.2mm kerf, so perhaps 3.2mm is for the smaller blades 10inch and below.
http://www.timbecon.com.au/sawing/ci...lar-saw-blades
it had a 30mm bore, timbecon also sell 30mm -> 5/8" saw blade bushes if needed.
-
9th September 2015, 10:21 AM #3Intermediate Member
- Join Date
- Jan 2015
- Location
- Victoria
- Posts
- 29
Great advice Kuffy! Exactly what I needed and is nice price on special and from Australia, awesome.
I think Aussie stores need to look at how their stores and products are listed on Google because I just couldn't find anything by searching google.
Even when you find a woodworking saw, why not have a category on the side saying 'Saw Blades'?
Thanks for your help.
Similar Threads
-
Mitre slots in GMC table saw.
By fanlee in forum TRITON / GMCReplies: 1Last Post: 29th March 2014, 06:42 PM -
Blade for mitre key slots
By Dengue in forum BOX MAKINGReplies: 6Last Post: 27th November 2013, 06:08 AM -
A good table saw blade for flat bottom rebates?
By Ausworkshop in forum WOODWORK - GENERALReplies: 6Last Post: 30th March 2013, 03:53 PM -
Mitre 1000SE. My table slots don't fit.
By RichardL in forum INCRA JIGSReplies: 23Last Post: 18th November 2007, 03:51 PM -
WC2000 Table Slots
By Alix in forum TRITON / GMCReplies: 3Last Post: 26th July 2003, 05:30 PM