Results 181 to 195 of 219
Thread: Willy's new Workshop
-
28th November 2015, 12:40 PM #181
Hello paul
Thanks for turning the photos for me.
I accidentally posted this thread here, it was meant to be in the Shed Build, but I guess I do spend a lot of time wood turning
I lived for 4 months in Dam Neck, Virginia many years ago, and did visit South Carolina a few times, especially Duke University and UNC, wow, a young Aussie Sailor at a Frat party in the US!!!!!
Cheers
WillyLast edited by Big Shed; 28th November 2015 at 12:57 PM. Reason: Threads merged
-
28th November 2015 12:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th November 2015, 01:47 PM #182.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,805
That is good news about the AC working so well.
I notice the the AC cool air exits come down quite low into the body of the shed.
It would have been better in they were higher up so the resulting air flow could quickly scavenge a bit more dust from the shed air.
-
29th November 2015, 02:16 PM #183GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Nice set up there Willy. Pity about the stuffing around, that has to be done, after the so called experts do their job.
A nice man cave for when retirement calls.To grow old is mandatory, growing up is optional.
-
29th November 2015, 10:48 PM #184
Hello Bob
The A/C has a dropper which comes down about 1800mm and then a plenum (3 way), this drop was to ensure good airflow, which may have been interrupted by the bottoms of the trusses. There will also be a Microlene fitted at the opposite end of the workshop area
Cheers
Willy
Jarrahland
-
3rd December 2015, 07:17 PM #185
Some storage shelves for the shed
Good afternoon Ladies and Gentlemen,
The shed build has been been going very well so far, my back is improving heaps and I've been able to do a tonne of work. I had intended purchasing a compactus from gumtree to use for storage of tools, equipment and timber. Luckily, at work we had a heap of massive static frequency converters delivered in large timber framed boxes, this was supplied by contractors. They were offered to everyone at work, I thought I could use them as storage cabinets. These wooden boxes being free weren't ideal but certainly a lot cheaper than buying the compactus for about $800-1000 on gumtree. I grabbed three of them, they measure 2 m tall, 1200 wide and 900 ml deep. Luckily, I also have a friend who owns a skip bin business, he said there were some Benchtops that I might be able to use for shelving. I went to have a look at them they were almost brand-new sheets of MDF fibreboard I grabbed five. 👍
I bought some 50 x 75 pine boards and used these to support the shelves. Then I had my daughter paint the internals and externals just to brighten up a little bit and make things easier to see within the shelves as well as a more appealing appearance. I then assembled them and placed them in position around the workshop and screwed and glued them together. They appear to be remarkably robust I still have a heap of stuff to bring down to the workshop, at least now I've got a lot more storage area and I can start getting organised. Hopefully, I'll get 5 to 10 years worth out of them, they don't look the best but they are cheap and will do the job for the time being. 🙈
Now that I have some storage area, I can start organising the workshop. The next job will be to manufacture a workbench. 🔧🔩🔨
Cheers,
Willy
Jarrahland 🌳
-
3rd December 2015, 08:23 PM #186
Ah to have organised space
Dave TTC
Turning Wood Into Art
-
4th December 2015, 02:18 PM #187GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Nice work Willie, and the cost of it all can't be beaten, some $ for paint, result, a set up most of us could only dream of.
KrynTo grow old is mandatory, growing up is optional.
-
4th December 2015, 10:22 PM #188
new workbench
Good evening ladies and gentlemen
I finally got around to making my new workbench of manufactured from LVL beams either purchased from gumtree or I've been given by friends who are in the construction industry I've never use this before but I find extremely versatile very strong very easy to work wih.
It took awhile but I fInally find some on gumtree and paid three dollars each for them I bought 22. 22 of them was about the limit for the roof rack on my Ute.
A couple of my friends have made similar workbenches in their workshops, so I based my design on theirs. Using my new mitre Saw and hundreds of 75 mil Square Drive wood screws and quite a few tubes of liquid Nails, I set to work. I am really enjoying using the workshop. I have moved a digital radio and fitted it with an ipod. I can now have all the Pink Floyd I can listen to, all in air conditioned comfort.
Firstly, I cut, glued and screw some basic square frames together, then added the longer beams. I made the work slightly higher than most people would be happy with, but it really suits me as I am a reasonably tall fellow..
Using the left over melamine laminated workbench tops, I glued and screwed them to the basic carcass. I also attached the carcass to the wall for rigidity, which it has achieved. I added a lower shelf to store tools and other items. Now I have a work bench, I can really steam on ahead as it gives me an area to spread out, place tools on and make real headway.
the work bench measures approximately 5 meters long, 1 meter wide. I can't remember how high it was, but I reckon it is about 1.2 meters high.
Wasn't quite sure if a router would give me a nice finish, so I tested a scrap piece for a bull nose finish, looked good. I then routed afull bull nose edge on the front and sides. Really happy with that result. I sanded it with 240 grit. Looks great!!
Love the workbench
cheers
willy
jarrahland
-
4th December 2015, 10:29 PM #189
Nice solid lookin benches
is your sparky friend still around? I've found that a power point (or two) along the front of the bench is rather handyregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
4th December 2015, 10:49 PM #190
Seeings as you are done there ....
Dave TTC
Turning Wood Into Art
-
4th December 2015, 11:22 PM #191
-
5th December 2015, 04:19 PM #192regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
6th December 2015, 05:31 AM #193GOLD MEMBER
- Join Date
- Sep 2008
- Location
- North Carolina, USA
- Posts
- 2,327
Willy copied the shed from the one behind here:
https://www.google.com/imgres?imgurl...BkIQMwhBKA8wDwSo much timber, so little time.
Paul
-
6th December 2015, 08:09 PM #194
-
10th December 2015, 02:56 PM #195
nice racks
Good morning Ladies and Gentlemen
I thought I had a heap of photos displaying the mayhem of my shed with huge piles of timber, slabs and turning blanks. I must of mislaid them them, you are just going to have to imagine a large pile of disorganised blanks, slabs and burls.
To organise them into some order, I used some more LVLs, laminated veneer lumber. I love these, they are 70 x 70 mm and 5 meters long. I bought these ones off gumtree for 5 dollars each, delivered. How cheap is that? So cheap, I decided to buy the lot, 34 of them, when I had worked out I only needed 15. I knew I could use more later.
first, I glued and screwed up the carcass, approximately one meter deep and 2 1/2 meters wide and 2.7 meters high. I used more LVLs as racks, to aid with the airing of wet timbers and avoid mould. This worked out to be unbelievably strong, robust and rigid. I did also attach it to the wall. All my slabs and blocks are now organised into species.
the next stage was to build racks for all my burl rounds. This was attached to the first rack for rigidity. This rack design was based upon my other similar steel rack, but made from LVLs . It is approximately 4 meters long and 2.7 meters high. I varied the heights of the racks with the intent of largest at the bottom, approximately 500 - 600 mm blanks, and the smaller blanks at the very top.
this rack worked perfectly, all joints glued and screwed and all racks weight tested prior to use, I climbed upon them. The LVLs barely deflect, but I have braced them up with heaps of screws and blocks. I imagine there is a lot of weight, but this thing is solid.
Next job, an LVLs based trolley to help me move timber with the lifting and carrying.
thanks for looking
Sincerely
Willy
Jarrahland
Similar Threads
-
Willy's take on the Arbortech Contour Sander
By Willy Nelson in forum HAND TOOLS - POWEREDReplies: 1Last Post: 6th September 2014, 07:43 PM -
Free Willy
By Sir Stinkalot in forum BANDSAWN BOXESReplies: 4Last Post: 6th September 2014, 06:44 AM -
A great day with Willy Nelson
By dai sensei in forum TIMBERReplies: 2Last Post: 21st April 2014, 11:42 PM -
Workshop hire/open access workshop in Victoria?
By ariffaazmi in forum WOODWORK - GENERALReplies: 10Last Post: 5th February 2013, 03:27 PM -
Look out prudes.... the willy gets a mention!
By Christopha in forum WOODIES JOKESReplies: 0Last Post: 18th April 2005, 02:11 PM