Needs Pictures: 0
Results 1 to 15 of 20
-
26th December 2015, 11:19 AM #1
Hafco Woodmaster B-18v Scrollsaw Information
Hi guys
As promised here is the information on the Woodmaster scrollsaw from Hare and Forbes (Machineryhouse - New & Used Wood, Metal & Workshop Equipment - Home | Buy Workshop Equipment & Machinery online at machineryhouse.com.au). I could not find any useful information about it before I purchased it so hopefully this will help someone else.
Cost: $297 but if you sign up to their newsletter you get $50 off your first purchase bringing it down to $247 - great price for a learners 18" (45.72cm) scroll saw.
Features
120W 240V motor
Variable speed (550 - 1600rpm)
450mm throat capacity
Ideal for wood, metal or plastic
Cast iron table tilts 45º to the left and 8˚ to the right
Accepts straight or pinned blades
Includes Air blower, flexible work light
35mm dust collector port
Dimensions (LxWxH) 69 x 32 x 50cm
Out of the box pics coming in next reply to this post once I work out how to insert them lol
-
26th December 2015 11:19 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
26th December 2015, 11:29 AM #2
Ahaa! Have to be on full site to add attachments
Out of the box photos attached!
image2.jpg image.jpgimage1.jpgimage3.jpg
-
26th December 2015, 11:52 AM #3
Fully set up with all attachments....
first thing to go will be the shield... It prevents blade changes so would need to be taken on and off every time you need to change a blade or rethread a blade... Not going to happen lol peter is going to get me a face mask just in case its needed (i wear glasses so safety glasses wont work)
second thing to go will be the foot - the actual attachment is needed to hold the airhose in place but the foot can be removed....
pic attached of fully setup
more to come soon .... Peter is off to bunnings to get bolts to bolt it down (the ones we had arent long enough)
image.jpg
-
26th December 2015, 01:09 PM #4
Ok bolts are back and screen/foot are off... Photos attached
i have also attached photos of the on/off switch and variable speed dial which are at the very front, the blade tensioner at the back of the machine, and the table tilt mechanism at the front, plus the air hose and the light (which im not overly confident will do much at all... But I may be surprised)....
image.jpg image1.jpg image4.jpg
image3.jpg image2.jpg image5.jpg
image6.jpg
-
26th December 2015, 01:48 PM #5
Ok we are now bolted to the desk....
Pinned Blades
Easily attached, easily changed... Photos attached...
you dont need to take the yellow plate out to change a pinned blade but i did so we could get pics...
1. Release the tension (top back of machine)
2. Lower pinned blade into hole then move it towards back until it fits into slot, lift up til it catches
3. Push down on top of blade holder and slip top end into groove
4. Retension until blade tings
all set to saw.... And if you were only going to use pinned blades this would be a great beginners machine....
However, non-pinned blades coming up....
image.jpg image.jpg image.jpg
image1.jpg
-
26th December 2015, 02:18 PM #6
Ok we are now bolted to the desk....
Pinned Blades
Easily attached, easily changed... Photos attached...
you dont need to take the yellow plate out to change a pinned blade but i did so we could get pics...
1. Release the tension (top back of machine)
2. Lower pinned blade into hole then move it towards back until it fits into slot, lift up til it catches
3. Push down on top of blade holder and slip top end into groove
4. Retension until blade tings
all set to saw....
-
26th December 2015, 02:26 PM #7
Non-Pinned Blades
two words....
FORGET IT!
this system for the non pinned blades is impossible to use
first you need to put the blades into the holders, but not all the way or the blade is too short, you need to make sure they are centred both vertical and horizontal - try 20 minutes, then you need to insert them the same as the pinned blades, but pray the blade you chose isnt too thick to get through the slot....
end result - pinned blades only unless peter can work out a better way of doing it
very very disappointed...,
so down to bunnings for some el cheapo blades so I can at least use it
-
26th December 2015, 07:46 PM #8Senior Member
- Join Date
- Jan 2012
- Location
- Yenda NSW
- Age
- 74
- Posts
- 344
So sorry you are not completely satisfied with the new saw,my saw is a carbatek & it has a tension release lever above the top blade holder, to change the blade I release the tension with this leaver & I have a quick release blade holder ,no alan key just a knob to turn to release the blade then I remove the bottom blade holder complete with blade & use an alan key to install new blade into bottom holder,reinstall blade & use the tension release lever in the other direction to get your tension back,you can get the quick release blade holder from Helen Harris,let me know if you require her e-mail address.Hope you can make sense of this.Cheers Peter
-
26th December 2015, 08:00 PM #9
Hey hun
thanks for the info but i have already talked to Helen and the one she has won't fit mine..... However! After searching all day we found this one that does the same but for my scroll saw (ie it has the same shape attachments etc) Scroll SAW Blade Holder Conversion Adapter SET TO Take PIN Plain END Blades | eBay - so for about $65 (including postage) it will work like yours yay!
I will finish my "Whether this scroll saw is worth purchasing for pinless work" bit once we have the conversion kit in place if it works she will be a fantastic scroll saw for $315
oh ps - conversion kit is due sometime between 7 January and 18 January
-
26th December 2015, 08:19 PM #10
Ok back to the pinned blades....
Machine works beautifully... Easy to tension blade, to swap them out, and she cuts like a dream. She is very quiet and barely vibrates (which I was very surprised with being such a cheap option).
the light would probably be good if you had no other lights on, but since i am sitting under fluros, its kinda null and void
the little blower was a surprise, it does actually blow enough to keep the saw dust away from your line of site.
at the moment we dont have a vacuum hooked up, so it drops the dust down onto the table, but that is easy fixed too
So my outcome so far is that she was worth getting IF the conversion kit works until then I will just have to pick projects that dont need the smaller pinless blades
-
27th December 2015, 10:09 AM #11
Great write up Cuddly. Do they make a version with a horizontal table LOL. I hope the conversion kit works for you, and if it does you will be way ahead price wise.
Are both the segmented tube and the clear tube blower nozzles?
We have a loan of a cheap Aldi scroll saw at the moment which my wife is trying out to see if she likes doing this type of art (for want of a better word). The design of the machine looks very similar to the H&F unit, and for the price runs very smoothly. I will be keeping an eye on your reports to see if yours might be a good option if we purchase one down the track.Dallas
-
27th December 2015, 10:12 AM #12
-
27th December 2015, 01:54 PM #13
I know it doesn't help you, but it may help others in the same boat. These are available in Aus.
Dallas
-
27th December 2015, 07:32 PM #14
Hey Dallas isnt the whole world sideways?
the segmented tube is the light
the clear tube that joins to the metal pipe is the blower
its a nice little unit for the money with the exception of the pinless blade adapters
my upgrade though will be the general when I can afford $1200 lol unless anyone has a better option??
-
27th December 2015, 07:33 PM #15
Thanks but we looked at that too and it was basically the same as what we already have
hmm they dont post under the right messages so this was for the Olsen Adapters link
Similar Threads
-
Woodmaster Wood lathe information
By Flags in forum WOODTURNING - GENERALReplies: 2Last Post: 10th February 2013, 05:31 PM -
Hafco Woodmaster T-318
By ade_r_bell in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 2Last Post: 21st June 2011, 08:31 PM -
Hafco Woodmaster any good
By Ralphy in forum TABLE SAWS & COMBINATIONSReplies: 9Last Post: 15th November 2009, 07:48 PM -
Hafco Woodmaster SB-12 SAW BENCH
By johnny_v in forum TABLE SAWS & COMBINATIONSReplies: 17Last Post: 14th July 2008, 01:43 AM -
Hafco Woodmaster BP-300
By jumpy in forum BANDSAWSReplies: 4Last Post: 24th August 2007, 03:02 PM