Needs Pictures: 0
Results 1 to 15 of 38
Thread: Care Package from San Antonio
-
5th January 2017, 07:39 PM #1
Care Package from San Antonio
Well today I thought Xmas had been reinvented. I while ago I undertook to purchase from Rob Streeper one of his hand made saw hammers. This was to go to Fence Furniture first in a bulk package for onward transmission to me.
Today it arrived. As I was carrying it home from the post office, I thought to myself it felt a bit heavy, but it been a while since I committed to purchase and I couldn't quite remember what I had bought. There should be a set of saw nuts in there, some 100mm DEST saw files and the saw hammer.
It seemed a little heavy. The house is only about 200m from the post office, but I was starting to appreciate we didn't live any further away. Good buying decision I thought.
I opened the parcel and found this lot:
Rob Streepers Dog Hammers 001.jpgRob Streepers Dog Hammers 002.jpgRob Streepers Dog Hammers 003.jpgRob Streepers Dog Hammers 004.jpg
No wonder it was heavy:
Large dog hammer 1.21Kg
Medium dog hammer .73Kg
Small dog hammer .51Kg
Cross pein hammer .74Kg
Ok I suppose my stamina is not what it was once. If you are walking out of the desert with me, it might be to your advantage not to flake out .
Then there were these beautifully made saw nuts:
Rob Streepers Saw Nuts 001.jpgRob Streepers Saw Nuts 002.jpgRob Streepers Saw Nuts 003.jpgRob Streepers Saw Nuts 004.jpg
Not a great deal of weight in those, but so beautifully made and robust compared with the split nuts of yore. They were my prize for nearly guessing the era during which ACME saws were harder. I accept the exulted status this gives me and chose not to mention I was the only entrant as it tends to detract from the aforementioned status. They are superbly made and so consistent. The main problem now will be deciding what saw to stick them on.
Lastly and contributing minimally to the mass of the package were the files.
Rob Streepers Small saw files.jpg
They have come at such a good time. I sold a Simonds No.371 to a guy who visited one of the Millmerran Historical Soc days where I had my saw exhibition. He also had a tiny 8" Spear and Jackson back saw he wanted retoothing. In a rash moment I agreed a deal to do this in conjunction with the Simonds sale. He wanted 16ppi. I have filed all the old teeth off and started to mark out for the new teeth. These new files are going to make this task so much easier.
So how did I end up with four dog hammers? The biggie was a pressy from Fence Furniture. (Thanks Brett. Very much appreciated). Then there was the cross pein style which was my original purchase. The other two hammers. I'm not sure, but I will be contacting Rob. There may have been an error and I owe a little more folding money.
The hammers are really well made and finished and the handles are extremely well fitted. If any of you have hesitated over the hammers or the saw nuts don't procrastinate any longer: Just do it.
Sorry if this sounds like an advertisement or even an eulogy. Actually I'm not sorry. It is thoroughly deserved.
Rob, when are you coming to Australia so I can shout you a beer? Make that a slab (that's Aussie for a carton). You are most welcome anytime for as long as you want.
Gotta go now and clear up some of the drool from the mouse pad .
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
5th January 2017 07:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
5th January 2017, 07:45 PM #2
You are very welcome Paul. You've done myself and others numerous favours, so just a bit of pay back, and a bit of pay forward, perhaps in equal measure.
And you're right about the quality - beautifully made! I don't know if Rob made the Hickory handles from scratch or modified something existing, but the fit and finish is excellent.
-
5th January 2017, 07:50 PM #3
Those hammers are gorgeous, they really hit the spot for me aesthetics wise.
-
5th January 2017, 07:54 PM #4
-
5th January 2017, 07:55 PM #5
Brett
You and the other Forum members are most welcome. Gifts like this right out of the blue are the best of all.
Thank you so much.
Damn, where is all this drool coming from?
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
5th January 2017, 08:02 PM #6
Bueller
I can honestly say (now that I have some super absorbent flannel toweling around my chin) that the hammers look even better in the flesh than the pix. The contrast in finish and the balance both in aesthetics and feel seem just right.
I would have tried them out already, but I got an emergency call from SWMBO to pick her up from Toowoomba where she had taken her car in for repair. They have pulled it to bits and it will be that way for a week.
She caught me on a good day so I couldn't ask her to walk or hitch home. Well it is 80Km away and there were no arrangements made for tea . I might have starved .
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
5th January 2017, 08:16 PM #7
Paul
Are you organising a saw smithing thingy
Rob your hammers looks spectacular.
I remember reading the thread on them
Cheers Matt
-
5th January 2017, 08:31 PM #8
Matt
You have raised an interesting subject there. I might combine with the D-23 saw configuration comparison, which hasn't been entirely forgotten. It was deferred. Santa took precedence. Appears he has been here before.
And now I do believe!!
I will have to work on a date for GTG, but I need to put in some practice first so I don't appear as the charlatan I really am.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
5th January 2017, 08:39 PM #9
It would be great to get together again.
And get hammered [emoji3][emoji1008]
-
5th January 2017, 08:49 PM #10GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,503
Paul, they look the good.
Rob. Well done. Might have to put in an order.
-
6th January 2017, 01:23 AM #11
Paul,
Glad to read you like them. I'm looking forward to seeing how you apply them. I'm sure that there's a lot of personal variation in preferences but you might try the hammers with the anvil face about level with your hip plus or minus a little, I find that a higher position increases the tendency to form dents and produces less consistent work.
Regards,
RobInnovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
6th January 2017, 07:46 AM #12
Thanks Rob
"Like" is a little bit of a euphemism in this instance . I might have got that a little bit ar*e about face (a euphemism in reverse?) What I meant was that "like" is an understatement. I have been over the moon and am on my way back.
Dents are the bane of the saw restorer as they are so easy to include and so difficult to remove. I will certainly try your recommendations.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
6th January 2017, 09:00 AM #13
What a superb little parcel
regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
6th January 2017, 11:47 AM #14GOLD MEMBER
- Join Date
- Jun 2014
- Location
- Seattle, Washington, USA
- Posts
- 1,857
I don't even want to imagine what that cost to ship!
Certainly worth it, no doubt. Great looking set of gear.
I, like the others, am excited to see what you make with all of it, Paul.
Cheers,
Luke
-
6th January 2017, 11:54 AM #15
Wow, what a great package!. Those hammers look fantastic.
Rob certainly does excellent work, I've been using his saw nuts in a saw making class, and everyone loves them.
Ray
Similar Threads
-
Antonio Gaudi - Casa Batlló, Barcelona Spain
By ubeaut in forum WOODWORK PICSReplies: 2Last Post: 31st January 2012, 09:42 PM -
Care Package
By Penpal in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 31st October 2010, 05:09 PM -
Howdy and G'day from San Antonio, Tx
By Nexusmagic in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 12th August 2008, 09:16 PM -
Timber Shortage in San Antonio Texas
By ticklingmedusa in forum WOODTURNING - GENERALReplies: 6Last Post: 24th December 2007, 12:18 PM -
Developing from care-free Tritoner to care-worn cabinetmaker....
By Tinkerman in forum INCRA JIGSReplies: 3Last Post: 3rd March 2006, 10:34 AM