Needs Pictures: 0
Results 1 to 15 of 23
Thread: Multi tool recommendations
-
6th May 2017, 07:32 PM #1Senior Member
- Join Date
- Jan 2017
- Location
- Sunshine Coast
- Age
- 64
- Posts
- 212
Multi tool recommendations
Gday all
As I'm now restoring 100+ year old sash windows, I need to get around to buying a multi tool.
I already use Makita 18V tools.
Have had a Bosch green 240V unit, but was very noisy.
Do I buy Makita 18V, Bosch Blue, Fein, or other?
Anything I buy will be expected to perform professionally on a regular basis.
Thanks
-
6th May 2017 07:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th May 2017, 08:23 PM #2SENIOR MEMBER
- Join Date
- Oct 2011
- Location
- Langwarrin
- Age
- 44
- Posts
- 952
I have had a Fein for about 6 years now and I consider it bulletproof. Always performs and has never let me down (I'm a carpenter). I have used other brands but I find the Fein feels more solid than anything else I have looked at.
I think the noise is more the style of tool rather than a fault in a particular brand.
I have not ever used a cordless one so can't comment on a Makita 18v
I'll certainly be replacing mine with another the same when it eventually dies. I know they're quite a bit more expensive than other brands, and until I saw you said it was being used professionally I wasn't going to recommend it....but you can justify the extra $$ if it's for work
I'm sure other brands do their job, but this is my experience
Cheers
Gab"All the gear and no idea"
-
6th May 2017, 08:27 PM #3
W,h,s
Or the makita
I've used both professionally for years.
And I can be hard on work tools.
They need to perform if I'm going to make money of them.
Cheers Matt
Sent from my iPhone using Tapatalk
-
6th May 2017, 08:35 PM #4SENIOR MEMBER
- Join Date
- Jul 2014
- Location
- Gold Coast Australia
- Age
- 67
- Posts
- 519
If you settle on a fein I have one I no longer need that I may be willing to part with. PM if interested.
-
6th May 2017, 09:20 PM #5Senior Member
- Join Date
- Jan 2017
- Location
- Sunshine Coast
- Age
- 64
- Posts
- 212
Hi George
I've sent you a PM
-
6th May 2017, 11:03 PM #6
I have a corded Blue Bosch that I blew the gearbox out of last year; maybe one day I'll get around to fixing it.
I replaced it with an AEG 18V "Omnitool" as I already have a few of their cordless tools; and Bunnies were selling off the spare multitool heads so I now have a spare also. This tool is more lightweight than the Bosch.
To be frank; the multitool only really excels in two areas; it can flush trim and it can cut square holes. Anything else can be done by another tool; usually better. If you can definitely see a real need for one then I would go for a Fein; they are much more robust than anything else on the market.Nothing succeeds like a budgie without a beak.
-
7th May 2017, 01:45 AM #7
If I were you and if George is willing to part with his Fein, then Id grab it.
In your other thread I was following it from Post #1 but didnt want to comment early as I tend to go overboard. If a simple window sash counterweight fix is to be done... well, my wife will tell you it turns into a reglasing, a complete paint job, replacing cornice, paint the room, polish the floors, new electrical switches and hinges on the doors.... totally overboard!
Ive done two houses (grandmothers and aunts) with windows repairs like your other thread: Repair 107 year old sash cord and wish I had the fien then.
The fien excels at doing renovations and doing tricky tidyup and cuts, especially the job you are doing on the window.
When you remove the front panel to access the counterwight you end up cutting off a ton of paint and left with a job of tidying up all the mess. The fien will do all the paint cutting and post-job fix up very nicely.
I first bought it when I moved to Canberra 6 years ago for fixing up where I live now. The paint job was an utter horror story and the renovation work left me dispondant. It was bought at Sydney Tools soon after and it absolutely ripped through the work. The bulk sanding used a Festool ROS125. The fien is for detail and fiddly bits.
At the time the sanding pads and cutters needed a kidney donation to buy, but that has changed drastically now.
Keep in mind I believe that the promotional videos show completely unrealistic usages for the tool. To do bulk sanding and big cuts is stupid. Its a scalpel, not a broadsword and when used in combo with a regualr ROS sander it is a magic tool.
The sandpaper and backing pads simply hate heat, so a light touch in necessary. The timber cutters are OK and the ceramic cutters and masonary-sanding/dressers are great for tiling jobs.
-
7th May 2017, 08:21 AM #8Senior Member
- Join Date
- Jan 2017
- Location
- Sunshine Coast
- Age
- 64
- Posts
- 212
Thanks for all the info.
Yes, the simple job of replacing a sash cord is becoming a larger project by the hour.
Old houses [emoji537] tend to do that.
-
7th May 2017, 12:45 PM #9Member
- Join Date
- Feb 2017
- Location
- Victoria
- Age
- 47
- Posts
- 52
My only advice is consider the variable speed option that best suits your use. I have Makita 18v tools but found the Makita multitools were all speed controlled via a dial, which is a real nuisance if trying to plunge cut or do more delicate work. I've also got a cheaper Ryobi cordless that uses a variable speed trigger which uses the slower starts to advantage in a plunge cut, but lacks the options of general sanding, grout removal etc. that the speed dial models give.
-
7th May 2017, 03:34 PM #10
I have not tried the others, but I have a green Bosch, and find this very acceptable. Keep in mind that it comes out very occasionally for home reno work. It is not a furniture-building tool. I recently used it to sand into the corners of cabinetry I restored, and to aid in removing tiles in a kitchen. I plan to use it in a while to remove grout between floor tiles in a bathroom (so as to remove a few tiles which have cracked).
With this particular machine, I purchased the dust collection accessory (why does it not come as standard), which works quite well (when using sanding disks). The machine uses the same cutters, etc as Fein and others (but the Bosch ones are excellent and better value-for-money). I find it quite a lot less noisy than most other similar machines (still, I cannot imagine anyone not using ear and dust protection anyway). The price was right (especially for a tool that gets limited use). Were I to be offered a Fein for the same price, based on reputation I would jump at it. Otherwise I am satisfied.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
7th May 2017, 04:04 PM #11
-
7th May 2017, 06:23 PM #12Senior Member
- Join Date
- Aug 2015
- Location
- Newcastle
- Posts
- 498
I have a Hitachi CV350V(H1), for me it was the best value as it came with a case, a couple of bits, 3yr warranty and has speed control with feedback. The auto mode is a bit silly, it seems to hunt a bit on tile grout, may work better under more load, doing plunge cuts, chopping nails etc.
It is loud and feels okay in the hand but I think a fein would be a lot nicer, still, for the money I am happy with the hitachi, it is nicer than the Renovator I borrowed from a builder. I have also used a Milwaukee battery one and it was great, not sure if any of the Makitas have tool-less blade change, they usually seem to be one of the last to adopt tool-less blade changes in their battery stuff for some reason.
EDIT- I got mine from Sydney Tools, they are by far the cheapest in my area and their staff* are the most knowledgeable...........by far!
*One guy is a no nothing know it all, so I avoid him.
https://sydneytools.com.au/by-brand/...i/multi_tools/
This fantastic man does a tear down on the fein, I love his vids- https://www.youtube.com/watch?v=RFwURUE-Fu8
-
7th May 2017, 07:31 PM #13
I have both a Bosch corded and a Makita 18v cordless.
My original Bosch died, so I replaced it with another. Got the cordless to do a job where there was no power and I was up a ladder working on eaves.
No problems with the Makita except it seems to drain the battery if left in when not in use. The Bosch has built in dustport if sanding, for the Makita it is an accessory.
Sometimes it is as much about the tool bit as the tool to operate the bit.
-
8th May 2017, 02:06 PM #14
-
8th May 2017, 02:13 PM #15
Fein
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
Similar Threads
-
What multi-tool is this blade for?
By gavinabrown in forum WOODWORK - GENERALReplies: 5Last Post: 28th January 2017, 10:30 PM -
Multi tool
By Ozcee in forum HAND TOOLS - POWEREDReplies: 5Last Post: 26th August 2015, 06:54 PM -
Multi Tool's
By robtool in forum ANNOUNCEMENTSReplies: 8Last Post: 9th May 2007, 08:58 AM -
Multi Tool's
By robtool in forum HAND TOOLS - UNPOWEREDReplies: 0Last Post: 8th May 2007, 10:48 AM