Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
Thread: Remote controls
-
1st June 2020, 07:55 AM #1GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
Remote controls
Can anyone link me to a contact for the remote control system I see so many people using these days for their dust collectors? Thanks .
-
1st June 2020 07:55 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st June 2020, 08:14 AM #2I now have 3 sheds
- Join Date
- Aug 2010
- Location
- Soldiers Point, NSW
- Age
- 60
- Posts
- 185
Hi riverbuilder
Google 'AC 240V Long Distance High Current 30A Relay RF Wireless Remote Control Switch' and you will eventually find an eBay seller 'mfreelaa' who lists this item. They are about $22 at the moment.
Mine works very well and is highly recommended. I cut the power cord in half and wired mine into the power cord between the DE and the wall socket and then mounted the relay on the wall above the DE. A second or third remote would be very handy, especially if you have multiple machines, as my single remote always seems to be laying on a different machine whenever I look for it.
Regards
Twosheds
PS sorry I couldn't put a direct link in. I'm very I.T. challenged.
-
1st June 2020, 09:13 AM #3
I think this is what you're after.
AC 240V Long Distance High Current 30A Relay RF Wireless Remote Control Switch 608119953264 | eBay
I've got these installed on 2x 3HP and 1x 2HP extractors for the past 9-18 months with no problems.
Having done several, the last one I did was by far the best idea. Rather than mount and wire the switch into the extractor as I did with the other two, I housed the switch to go between the power point and extractor. The no-volt switch was then zip tied on. Simpler and more easily reversible if an issue were to develop (like sucking the remote up the extractor hose )
20191207_094624.jpg
-
1st June 2020, 09:36 AM #4
You can buy a remote control unit from Auto Blast Gates. 10 amp or 15 amp. Ready to go, no wiring.
Those were the droids I was looking for.
https://autoblastgates.com.au
-
1st June 2020, 10:00 AM #5GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 2,640
-
1st June 2020, 10:44 AM #6Those were the droids I was looking for.
https://autoblastgates.com.au
-
1st June 2020, 11:24 AM #7GOLD MEMBER
- Join Date
- Mar 2018
- Location
- Sydney
- Posts
- 1,166
@riverbuilder, I was assuming the new beasty was a 3ph unit, but if it's anything like the current Carbatec offerings it's only a 240v 15A. In that case I'd go with NCArcher's plan !
-
1st June 2020, 11:40 AM #8GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
If it is three phase I would use a VFD to run it as it gives so much more control and lowers current draw during the start phase. Some motors do not like being started more than a specified amount of times per hour because of the current draw and using a VFD takes away that limitation. It also allows the DE to be quitened down by reducing the motor speed, I do this at night or you want more flow just ramp up the speed to say 70hz. I don't know why the larger names in hobby DE even offer a single phase unit these days because it is so limiting and three phase is available so easily now with VFD's.
CHRIS
-
1st June 2020, 01:34 PM #9
I use this cheapie Arlec Remote Controlled Power Outlet - Twin Pack | Bunnings Warehouse
granted just a 2HP dusty that is outside under cover, the remote is in a central place,I would love to grow my own food, but I can not find bacon seeds
-
1st June 2020, 08:22 PM #10Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 274
Be cautious, do they have Australian electrical approval ?
-
1st June 2020, 08:32 PM #11
which one are you asking about? the one I mentioned is an Arlec (?) product sold by Bunnings. So, I'd guess it has approval
-
1st June 2020, 09:35 PM #12Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 274
Just because it’s sold here doesn’t guarantee it’s approved.
That said the Arlec products I have seen do have the compliance mark.
-
1st June 2020, 09:59 PM #13Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 274
-
2nd June 2020, 12:09 AM #14Novice
- Join Date
- Sep 2013
- Location
- singleton
- Posts
- 16
So what's the best 3 phase option? I know timbecon have one.....
-
2nd June 2020, 04:45 PM #15
Sorry to hijack your thread RB. The link below addresses approvals.
Auto Blast Gates Australia is Now Open For Business
singastorm, what 3 phase option do Timbecon have? I coulodn't find anything on their website.Those were the droids I was looking for.
https://autoblastgates.com.au
Similar Threads
-
Lathe feed controls
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 27th May 2019, 07:10 PM -
A Box to hold all those TV controls
By firey in forum BOX MAKINGReplies: 9Last Post: 21st December 2010, 11:24 AM -
TIG Controls explained.
By 19brendan81 in forum WELDINGReplies: 7Last Post: 28th May 2009, 01:22 PM -
Arlec Remote Controls
By Big Shed in forum HAND TOOLS - POWEREDReplies: 20Last Post: 13th September 2007, 08:00 PM