Results 1 to 7 of 7
-
20th June 2020, 11:11 AM #1Senior Member
- Join Date
- Apr 2020
- Location
- Seaford, Vic
- Posts
- 397
Drying timber slabs - how important is vertical weight?
When drying timber slabs does the vertical weight imposed when storing them as a stack with stickers in between play an important part in keeping them flat or will one slab stored on stickers with nothing above sray just as flat?
-
20th June 2020 11:11 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th June 2020, 11:51 AM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,826
Depends on a bunch of factors like drying area setup, thickness of slabs, type of tree and presence of stresses in wood.
In general some weight/force is better than no weight and the more the better
This is demonstrated by the way that slabs at the bottom of a pack are usually flatter than those near the top.
I've seen some slab millers put 100 mm thick concrete slabs on top of their packs - forklift required.
For a while I was steel banding my slab packs but then you have to remember as the timber dries it shrinks so the bands become loose allow the slabs to twist so they need constant tightening with wedges or similar.
I've also used ratchet straps but unless they're super heavy duty straps they're not very effective.
-
22nd June 2020, 09:03 AM #3GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,565
A through and through cut log produces both quarter sawn and back sawn slabs. If you are short on dunnage to weight the packs it is a good idea to place the back sawn material on the bottom and the quarter sawn on the top. This can be either within the one pack or a pack of back sawn weighted with a pack of quarter cut. The quarter cut material will hold it's shape much better than backsawn.
-
29th January 2021, 12:30 AM #4
-
29th January 2021, 08:43 AM #5GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,565
Straps do have one problem... they are not self tightening. Once the pack starts shrinking, during the drying process, the straps are constantly loosening, which means they must be constantly tightened. Top weight is constant and requires no maintenance. My weights of choice are the 1000ltr IBC tanks filled with water. Easy to move when empty and rock solid when full. The 1.2 x 1.0 fits perfectly on a metre wide pack and the 1.2m length works well with 300,400 or 600mm stickering.
-
29th January 2021, 02:36 PM #6Senior Member
- Join Date
- Nov 2020
- Location
- Qld
- Age
- 61
- Posts
- 146
Keeping crown cut stuff at the bottom of the stack and quarter/riftsawn stuff at the top will work wonders in controlling any degrade during the seasoning process
Interestingly I have seasoned material vertical standing in the past without major issues
There is a definite art in the process of seasoning green lumber
Make sure the shed temperate doesn't fluctuate too much and that the timber is correctly milled from the get go!
Mr Fiddleback
-
29th January 2021, 08:59 PM #7
Weight on the top is a must. This was old tyres on rims and not really enough:
Spotty air drying.jpg
This is a little better with the addition of concrete blocks;
Spotted gum drying.jpg
The same stack built a little higher.
Spotted gum drying still but more.jpg
Ideally you place as much weight on the stack as you can (within reason), but in practical terms for a hobbyist we will fall a little short of the ideal. Much depends on what sort of weight you have conveniently available and your ability to lift that weight into place.
Nice evenly spaced timber of the same dimension is preferable but often a luxury that is unobtainable for a backyard scenario.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
Similar Threads
-
Weight of wet timber slabs?
By RSD in forum ROUTING FORUMReplies: 2Last Post: 24th May 2020, 03:12 PM -
Water stains on drying walnut slabs
By ssrhein923@aol. in forum WOODWORK - GENERALReplies: 2Last Post: 2nd January 2020, 02:10 PM -
Treated Timber - Important read
By artme in forum SAFETYReplies: 18Last Post: 1st July 2009, 08:24 PM -
Weight of timber
By Matthewd in forum SMALL TIMBER MILLINGReplies: 4Last Post: 17th April 2009, 08:14 AM -
Storing/Drying slabs?
By g_man in forum SMALL TIMBER MILLINGReplies: 15Last Post: 16th November 2008, 11:10 PM