Likes: 0
Needs Pictures: 0
Results 1 to 2 of 2
-
1st August 2020, 08:22 PM #1GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Cursor Added to Incra Stop on Mitre Saw
I guess this might be the best place to post a modification I did on an Incra stop that a fellow forum member has asked to see. It in essence is a cursor with provision for a an LED inside the cursor lens but I have never fitted the LED as I found the cursor good enough and way more easier to read than the original Incra idea of using the side of the stop to sight for measurement. The cursors came from two Kreg flip stops that I had lying around and I have no idea where do get anything similar apart from making one. There is a hole drilled into the blackened end for the LED to be pushed into and the lead from the battery pack is pushed through the cavity in the stop and my intention was to put the battery pack on top of the sliding stop but it is too big and not really needed yet as I don't need glasses to read but for others getting older I can see the need.
IMG_2450.jpg IMG_2451.jpg
This is how the fence is mounted to the bench, it can be removed at any time by simply pulling it our of the white bushings it sits in.
IMG_2447.jpg IMG_2448.jpg
As an aside when I didn't use the LED for the cursor I 3D printed a light holder for my optical punch
IMG_2461.jpgIMG_2453.jpgCHRIS
-
1st August 2020 08:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd August 2020, 05:42 PM #2SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Brisbane (Macleay Is)
- Posts
- 273
Thanks Chris for the post.
Not quite sure how the cursor is attached to the stop. Is it just a friction fit?
Now I have to find a source of perspex cursors because I have several stops on my Incra Router fence and will want several stops on my Mitre saw fence.
Your good ideas never stop Thanks keep them coming
Ron
Similar Threads
-
QUEENSLAND Incra 5000 Mitre Sled and Mitre Gauge METRIC
By KahoyKutter in forum WOODWORK - Tools & MachineryReplies: 6Last Post: 8th May 2020, 01:13 PM -
WANTED:VIC Incra Mitre 2000
By Repete in forum WANTED & WANTED TO BUY - in AustraliaReplies: 0Last Post: 5th April 2020, 03:33 PM -
SOUTH AUST Incra Shop Stop
By rev in forum WOODWORK - Tools & MachineryReplies: 1Last Post: 17th October 2018, 12:55 PM -
Kreg Mitre Saw Stop Modification
By Chris Parks in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 0Last Post: 22nd March 2016, 11:55 AM -
Depth-Stop for Elu Mitre-Saw...
By Batpig in forum METALWORK FORUMReplies: 0Last Post: 28th May 2009, 09:38 PM