Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 25 of 25
Thread: New spindle moulder on its way
-
18th August 2020, 12:33 PM #16SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
well I could use the Frontline but these panels glue ups are 1.6m high. we only have 1.2m version here in NZ. to glue 1.6m I will have to use the Frontline Extenders.. takes time. so I just used my old and trusty Record clamps. I have several of these Record clamps at roughly 2m long, one of them I bought from an elderly lady in her 90's, I was wondering why she has a massive clamp thats almost twice her height and she said she inherited these from her father!
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
18th August 2020 12:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th December 2020, 11:27 AM #17SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
A quick update.
The new spindle moulder wont be here until late January, early Feb 2021.
This is fine with me as I will be travelling (actually spend more time in quarantine) before End of January, if you are a business I dont know how you can wait for 7 months, possible 8 for a vital piece of machinery.
meanwhile I will just have to make do with my existing spindy..SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
29th January 2021, 09:15 AM #18SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
Further update.
SCM completed the machine and machine was loaded on 23 Dec.
the ship suppose to arrive at AKL port by 19th Feb. there has been lengthy delays at AKL port. I should be able to see it by Easter. fingers crossed.SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
23rd March 2021, 10:14 PM #19SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
She arrived yesterday.
weighs close to 1100kg, measures 1600mm deep x 3800mm (at its tip) and almost 1900mm high. its one big spindle moulder
will be a busy 2021 and beyond.
162636815_10158530606688813_4566022437184691198_n.jpeg162087345_10158530606598813_3672799059179087337_n.jpegSCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
7th May 2021, 09:05 PM #20SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
It finally arrived today.
Although I have the measurements already but it certainly felt bigger, it dwarfs everything else I have in the workshop, including the 1100mm wide SCM WBS
Will need to re-arrange workshop again...
IMG_3681.jpgIMG_3688.jpgIMG_3689.jpgSCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
8th May 2021, 10:03 AM #21GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
You sure there’s only one spindle moulder in there?
that is massive.
-
8th May 2021, 07:58 PM #22SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
11th May 2021, 08:13 PM #23SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
The SM has found its home.. for now.
Thats a sliding table on the left of the machine, one flick and its under the machine so the shaper can do profiling.
IMG_3718.jpgSCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
-
13th June 2021, 11:16 PM #24GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
Does it have a tilting spindle Albert? Can you change the spindle quickly to put router cutters in? Like a felder or martin have?
-
14th June 2021, 12:26 AM #25SENIOR MEMBER
- Join Date
- May 2013
- Location
- Auckland, New Zealand
- Posts
- 997
Yes it does tilt both +46 and -46 deg, fully automated fence position, spindle tilt and height, I ordered mine with electro spindle so changing the spindle speed is done on the touch screen, no more belt to change.
There are two ways I can change the spindle setup/replace the cutter block
1. Using the pneumatic lock
2. HSK system (like Martin)
HSK system is way more expensive than pneumatic lock. hence I use the pneumatic lock for now and its more than enough, I am yet to use HSK system, I probably will never need to...
Here is a video of me using the pneumatic lock - a bit clumsy as I am still getting use to it.
SCM L'Invincibile si X, SCM L'Invincibile S7, SCM TI 145EP, SCM Sandya Win 630, Masterwood OMB1V, Meber 600, Delta RJ42, Nederman S750, Chicago Pneumatics CPRS10500, Ceccato CDX12
Similar Threads
-
SWAP ANYWHERE: 240v 3hp spindle moulder (30mm dia. tilting spindle)
By woodchopper in forum SWAP OR FREEReplies: 5Last Post: 13th July 2019, 04:53 PM -
QUEENSLAND 240v 3HP Spindle Moulder (30mm dia tilting spindle)
By woodchopper in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 6th July 2019, 09:42 AM -
FREE: QLD 240v 3hp Spindle Moulder (30mm dia. Tilting Spindle)
By woodchopper in forum SWAP OR FREEReplies: 1Last Post: 5th July 2019, 08:22 AM -
Spindle moulder or Planer/moulder
By HaydnG in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 8Last Post: 19th May 2006, 11:23 PM