Originally Posted by
munruben
My experience although very limited is as follows.
1. Thin cheap, thin CA glue from cheap shop. 1 brass tube let go during turning but no other problem although it is a bit fumy and you need plenty of ventilation during glue up. I only had the one failure and this may have been due to turning too soon after applying the glue. I have found the cheap CA takes a little longer to set over the thicker stuff but hey, the price difference is unbeleivable. I use the cheap CA most of the time but fumes do get to be a problem. Use a mask and keep area well ventilated.
2. Cheap 5 minute epoxy glue from cheap shop. No problem at all, never had a failure using this.
3. Aroldite 5 minute epoxy.. No problem other than the glue and hardner not coming out of the applicator in equal amounts. Maybe a faulty applicator. No real difference between this and the cheap stuff. Smell is a bit strong.
Haven't used 24 hour epoxy,