-
12 Attachment(s)
Australiana Coasters
Picked up a small log off the side of the road that seemed to have close interesting grain patterns. Thought it would be OK for a bit of pyrography work.
Decided on a set of Coasters with an Australiana theme.
I cut the log down to rough boards on a Triton Saw Bench before running them through a GMC thicknesser. All pieces were then fine sanded to a smooth finish prior to burning.
Attachment 292720
Burnt a Platypus on a test piece to see how it would go.
Attachment 292721
Then selected the Aussie animals (Wombat, Kangaroo, Koala, Emu, Cockatoo & Platypus) to be used before burning them to the blanks.
Attachment 292722Attachment 292723Attachment 292724Attachment 292725Attachment 292726Attachment 292727
The holder was then made from another two different timbers with an outline of Australia with a Cockatoo's head in the centre of the base. The corner posts are made from Peach tree with a Kangaroo's head burnt into each outer face.
Attachment 292728
Before all pieces were finished with several coats of clear varnish.
Attachment 292729Attachment 292730Attachment 292731
-
Mate they look bloody cool :2tsup:
-
They sure do look the goods!!:2tsup::2tsup::2tsup:
-
Well done!! What a fantastic job. I'm fairly new to pyrography and I hope I can et this good one day. Gret job