Hi all. Finally, and most recently motivated by reading Rob's post, I have begun building my very own infill plane. As per the photo below, I have cut out the base (steel) and sides (brass). And I am finally going to use one of the blades I bought from Tom (Scribbly Gum), a Peugeot Freres. The rough plan is drawn up on the bit of ply. I am planning on having only metal sides and a base, with timber (some NSW Rosewood) making up both bed, bun and wedge. Now is probably a good time to read IanW's booklet on the subject although I am lucky enough to actually own one of his planes and can copy from it directly. One question for the experts, do you use a regular wooden marking gauge to scribe lines parallel to the edge? Thankshttps://uploads.tapatalk-cdn.com/202...2b41830442.jpg
Sent from my SM-S928B using Tapatalk