Spindle Moulders and Tooling
Hi! There appear to be no newer threads for spindle moulders than 2009, so I'm starting a new thread.
I have ordered a new spindle moulder and hopefully be getting delivery within the next few weeks. This is my first spindle moulder and have had only router table experience. I would welcome any input tips to use and safety. And, as yet I have'nt purchase any tooling for the 30mm dia spindle moulder, I would greatly appreciate any information on what to buy and where.
One of my first projects planned is to replace the plain kitchen doors with wood paneled... thanks...:roll:
Pete
Spindle Moulders and Tooling
I have a MiniMax Cu300 with a spindle moulder with a 30mm shaft. This Italian unit came with a head and basic set of cutters and limiters that I have since expanded by purchasing several new CMT 40mm cutters and limiters from Carbatec. These cutters work fine and are good value. Whilst I did some work with hand feeding it is not the safest way to work and does give rise to "snipe" I have now fitted a new 1hp power feeder that I purchased from A1 Machinery in Sydney for less than $900 and this makes a big difference.
Cheers,
Paintman.