I have been using my 14in Bormac bandsaw for making Boxes from Jarrah Burl. Recently I found that the blade tended to move forward on the wheels and out from the guides. I went through all of the tuning procedures and today got some new tyres which I thought would be curved on the surface. (the originals appeared to be flat, hence the replacements) The new ones are FLAT. I have also replaced bearings and guide blocks .I am using 3/16 6tpi blades and sawing up to 5 1/2in burl. I need this size blades to get the curves I require for the patterns. I have not yet tried the new tyres on burl. Has anyone had the same problem with their bandsaw. The Bormac is the same as most other 14in bandsaws.
Alf:confused: