Argon Regulator flowmeter - orientation.
This seems like a really dumb question, but I've searched without result - so here goes.
I have an "E" Argon cylinder from BoC. It has a side entry for the regulator.
My regulator/flowmeter when oriented "logically" with the flowmeter vertical has the connection pointing vertically down.
If I screwed it into the E bottle the flowmeter would be lying horizontal.
The obvious??? thing to do is loosen the flowmeter and rotate it 90 degrees. (then tighten it!).
Then the flowmeter would be vertical with the pressure gauge and regulator assembly lying horizontally.
Is that the right thing to do, or is there another moe appropriate solution?
Yours sheepishly.....
Alun