Help with wiring a teco fm50 vfd !!!
Does anyone have 'good' information on the control wiring for a Teco FM50 VFD. I have looked at countless posts on forums and everyone has their idea on how to wire stop/start fwd/reverse and jog controls. ( single phase 240v to 3 phase unit)
Preferably I want to use external '3 wire' stop/start etc and using the VFD inputs/functions etc rather than using extra relays to do the latching.
Ideally I want to operate the VFD with momentary style Start/Stop , Forward and Reverse ( selectable switch) and perhaps jog function ( at least in forward direction) It is not fitting an existing machine, so I need to buy switches etc.
Some say that there is more wiring info on a 'CD' that was suppose to come with the unit ( along with the paper manual) Teco Australia don't know about a CD.
For every wiring schematic I have found there seems to be someone saying that it either has limitations or is less than ideal.
If all else fails I could use extra relay/s but not if it is unnecessary.
Any help would be much appreciated. I am on a learning curve with VFD's but have an electrical background. Just don't know too much about the jargon the manuals use. The Teco Manual is not very helpful.
:C