Attachment 49951
Attachment 49952
Attachment 49953
hardware from woodturingz
wood from beartothwood (extra)
mylands friction polish and carnauba for finish
all comments are welcome :p ( only good comments :cool: )
Printable View
Attachment 49951
Attachment 49952
Attachment 49953
hardware from woodturingz
wood from beartothwood (extra)
mylands friction polish and carnauba for finish
all comments are welcome :p ( only good comments :cool: )
Nice aren't they nice woods to work with. they do take a beautiful finish
bye Toni
Green, Yummm!
Nice design too!
Nice work Kruger, I like the lamination work that you have done and the design is plesing to the eyes. You have a yellow and green veneer are they timber or another medium that you have used an the green is different to the majority of the pen. Is it the same type of blank but with a lighter penetration of colour?
Darren
they are two timber veneers. one is grey green the other is yellow.
I have used two different green deyed blanks.
the angle cut is about 10 ° for the top cut and 20° for the bottom cut.
I thought of balancing the forms of the high part and I put fine mouldings between the two averages of the center