Taking The Next Step (Casting)
Well after spending a few hours with John (gawdelpus) and looking at all the wonderful and unusual blanks being made I decided to take the plunge and look into doing some of my own castings.
http://i142.photobucket.com/albums/r...k/DSC01863.jpg
So i now have some Resin and hardner as well as 6 different coloured pigments and 3 translucent pigments:D
Now all I need to do is set myself up with some molds, mixing cups etc and let the fun begin.
I have done some reading and watched a few videos on youtube :Das well as had a good chat with John however I am always open to any additional advice so let it begin :2tsup:
Cheers
Tony.
Ready to take that step !!
Hey All,
Well I have bought some PR and Pearlex from Barnes ! I also have my resin saver moulds :) mixing cups, popsicle sticks, droppers and ready to give this a crack !!:D
Can any of the casters out there advice me as to what the mix ratio is or how many drops per ? I should be using for the PR :2tsup:
I think I may have found the answer but just need confirmation 4 drops /Oz ??
Cheers
Tony.