Hi
Looking for blades for my Elu thicknesser!!
Can anyone out there help me out and directing me in the right direction to finding some??
Thank you
Jabba
Printable View
Hi
Looking for blades for my Elu thicknesser!!
Can anyone out there help me out and directing me in the right direction to finding some??
Thank you
Jabba
Hi Jabba,
Was wondering if you still have Elu DAH176 as I need to find the the roller diameters for this machine. My rollers have gummed up and to get them refurbished the rubber outside diameter is required, hopefully you can help, looking forward to your reply. Justdd
Jabba hasn't been on here since July 2012 so you might be struggling to get a reply.
I see you have asked the question in numerous places on the web but all are very old threads. As suggested on SMC, might be better starting a new thread there if you don't get anything here.
Peter Weiss in Riedering in Bayern, Germany is probably able to help. He is a retired machine shop owner now making and selling spare parts for old Elu machines. He has no e-mail and speaks only German though.
I'm guessing they'd be a nominal metric or imperial size, measure them at the ends where there's the least wear and pick the nearest normal sounding size; eg. if they measure 50ish mm, it's either gonna be 50mm or 2" (50.8mm) and the extra 0.8 isn't going to matter much.