Originally Posted by
linesman
astrodog. If you can get hold of a back issue No 63 of Australian Wood Review it has an article on making panels like the ones in the table. You need to make up 3 laminated boards from random sized strips of various timber mixed into each board. Then stack the 3 boards on top of each other bind them together with 3 or 4 strips of masking tape. Now draw a couple of curved lines along the length of the top board & cut along the lines on the band saw. Now mix the resulting pieces to give 3 boards of random design. For effect I place a 2mm fillet of light coloured timber between the pieces then glue together to reform 3 boards. Barry.