Does any body have a Nicholson #49 Patternmakers Rasp that they could measure for me please?
I need to know the thickness and width of the untoothed shoulder to the nearest 1/10mm, and also the width of the blunt tip.
Printable View
Does any body have a Nicholson #49 Patternmakers Rasp that they could measure for me please?
I need to know the thickness and width of the untoothed shoulder to the nearest 1/10mm, and also the width of the blunt tip.
Hi Brett,
I should have cleaned it... :) not sure exactly where you want to measure.. the tip width is 1/2" or 12.7mm
The untoothed strip varies, and the teeth aren't centered, but at it's widest it's 2mmm give or take..
Attachment 293339Attachment 293340
Attachment 293341
Regards
Ray
Hi Ray
Bewdy. The place to measure is between the "Nich" stamp and the teeth - overall width should be around 22mm at a guess, and the thickness would be 4-5mm? In other words I want to use the formula I have work out the radius of the blank, before toothing - I have a cunning French plan, my Lord :U. The width doesn't really have to be to the nearest 1/10mm - the edge teeth will affect that anyway.
Hi Brett,
That's 22mm x 3.8mm at the untoothed section where it's stamped.
Regards
Ray
Great! Thanks very much Ray. :2tsup:
As I thought, it's pretty close to a 200mm Cabinet Makers which has a radius of 16.9mm, where the #49 has a radius of 17.8mm, so it's just a little flatter - I doubt there'd be much practical difference in the radius. The biggest difference is that the #49 is 250mm long, and with a blunt end (that part is easy).